You can get a diagram of that amp here>>
Palomar Electronics Corp. Skipper 300
I have a 310m (mobile version of the Skipper 300 8950 tube box.
It has a terminal strip that the appears to hold the trans-stage tuning inductor coil. On the oposite side of the strip there is a wire wound 20ohm cap,,,,do not want to guess the wattage. Thing is about 1.5" long though. One leg is on terminal 2 of the strip (top to bottom) and shares that terminal with a ceramic disc cap, the other leg is soldered to the bottom most terminal and again shares it with a leg of another ceramic disc cap.
It appears to bridge the 2 caps across the legs of the caps that are closest to each other. The other leg of the upper cap is tied to the inductor coil, the other leg of the lower cap appears to be tied soldered to a ground point below the last full terminal.
Hope this helps.
I can't get any pics from flickr to load.