WorldwideDX Amateur Radio Forums

Linear bleeds on to my external speaker. Any ideas? what could I do to stop this? It's in the mobile, it's a Roadpro Titan II 485 and a 4 pill with an external speaker. When I talk it bleeds into my external speaker. Nothing else gets bleed over

__________________
QTH: Vert 160/80, Fan 40/20/10, Fan 17/15/12/6, 2m J pole, 2m halos Mobile: 12/15/17/20/40, 10, 6, 2/440

how much power are you getting from the 4 pill ?

in the sig

speaker wire...roll it up,or add or take away,its acting like a antenna...73 de JW

__________________
FT450d,TS520,RCI2950dx and 2980wx,seven Siltronix 1011d,FT250r ht,motorola maxtrac300 uhf SWAN1200x

Yes sir. my old amp did it too, but it was a lot smaller (150 ish) so not as big of a deal

__________________
QTH: Vert 160/80, Fan 40/20/10, Fan 17/15/12/6, 2m J pole, 2m halos Mobile: 12/15/17/20/40, 10, 6, 2/440

Try wrapping the speaker cable several turns through a ferrite core close to the speaker.

73
Jeff

__________________
Radio-active

NASA/SOHO


there is no dark side in the moon, really. As a matter of fact it's all dark

Try a 0.01 microfarad capacitor across the speaker leads as close to the radio as you can get it. ideally open up the radio and solder the cap across the contacts of the jack.

__________________

Yup