Worldwide DX Amateur Radio Forums - Ham - CB - HF - VHF - UHF

PALADIN · #1 09-07-2009, 10:11 AM

Hi to all. Bought a Yaesu FT-101ZD at the Shelby, NC hamfest. Did not have a mic. with it. Found a mic. in the outside flea market that was wired for the rig, but, when I got back to his spot, he had closed for the day and left. He wanted $50.00 for it.It looked in good condition. I should have got it when I had the chance.

So, does anyone have one or know of one I might get? Thanks in advance for help.(Oh, BTW, I passed my test and got General. Should get my call this week.)

moleculo · #2 09-08-2009, 12:54 PM

You could always get an aftermarket mic to work with it. Or keep your eyes on ebay....

6 Meters Rules · #3 09-20-2009, 08:15 AM

Shure 444 Sounds GREAT on that RIG!! $35-50

N8YX · #4 10-06-2009, 12:31 PM

Quote:

Originally Posted by 6 Meters Rules

Shure 444 Sounds GREAT on that RIG!! $35-50

I've been using a Telex 752 with my -901DM; same basic setup as the -101ZD. Get good reports with it.

Ditto the Shure 444/450 - these will work well.

ki4kmn · #5 11-02-2009, 10:08 PM

I see you are in Piedmont. I am not too far away in Easley. Send me a PM if you are interested in a D-104 ready to use on ft-101zd for $45.

big mike · #6 11-03-2009, 06:06 AM

I used a Heil Goldline (GM) with mine, they also have a Goldline Vintage (GMV) for the vintage radios.....always had great audio reports with the GM on my "ZD" and my "E"....

73
Mike

Worldwide DX Amateur Radio Forums - Ham - CB - HF - VHF - UHF

Mic fo Yaesu FT-101ZD