You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
If they are convicted as charged no Mercy!! Kill them all. No appeal straight to death.. This is where I believe torture is Good.. Animals to get there rocks off.. For Gods sake save us all..
I said many prayers for that Girl. Makes me sick..
Mark
Well after 2 weeks of some extras heavy winds. I went out and made the choke. ( ugly Balum) coiled up the remainder of coax and installed the window feed through from quicksilver. I was surprised at how easy that thing worked.. Feed the lines into shack .. Set up the Dosy and did some...
It has been 5 days of nonstop high wind in the 25 to 50 mph at 45 ft. I held off finishing the feed line hookup until it all stopped.. Just to see if it would survive. Well after seeing this thing whip around alot. It has held its ground and looking good. I have read that these antennas...
Sorry about that .. I have 5 dogs and 3 are getting there. I have had to put down 4 of mine over the years bring them home and give then all a good burial send off.. Saying a prayer and keep the good memories. Hope the Family feels better.. It takes a little time..
Markip
W5 Yes that is correct I really did not need a choke as of yet.. I wanted to and everyone has pointed me in the direction I need.
The main thing that I needed to find out is the best way with out signal loss to spool up my excess cable without a cut. The ugly way will in fact help with...
Robb. I was reading the full article on that and I was going to see if I used the 8 inch if I can find it. From what it described I could wrap up to 18 to 20 ft..
Maybe I read it wrong.. What go you think.. I have the room to put it on the ground and also keep it from the mast thanks for...
thanks you for all the info
I have about 12 ft. extra in the shack. I dont see any movement there. It is set up the way I need it.. I also have about 25 ft at the pole..
It could grew another 5 to 10 ft. more. will see if the HOA becomes lippy.
Its behind the tree the real big tree in...
I am out laying my 150 run on Davis bury flex as we speak. Trench dug, end pvc in place. grounds sunk. Here is what I need. I am coming up about 20 ft to much line. ( must of had a shot or 2 when I measured) LOL.. I really do not want to cut and replace the connector at one end. SO the...
thank you good people ( i assuming LOL) for the info.. I just ordered 20" of the lmr 240 with a Pl 259 on one end the other end open coax. I have all the correct solder gear just wanted to know the best route for this type of mobile. I have already taken it5 apart and was a little surprised...
I need to replace the coax on a Wilson 1000 mag mount.. Cut the line and it is toast. From what I see here I pretty much just need to solder in a new coax..
Is there a certain length that Wilson requires. 18ft? Please Advise and have a great day.. Markip :blink:
explain the setup on the variable power setup.. I am going to get the tune and alignment this week.. Is setting up talk back easy to do. Or not worth the headache.. Have a great day.
Markip
That was a good read the pics you received (STOLE) LOL from Booty helped. if I decided and send it to a shop for any thing beyond what I can do.. Any recommendations on tuning? .. I will send it out if needed. I received some good info here on a couple of really good techs that I will use...
I have just purchased a Grant Xl. mint and for 50$. The unit is stock and pretty much untouched. I am looking for any input on what mods can be done?
What mods should not be done and what is just a plain waste. I am not really needing it to be killed on the output more into clear strong...
I agree Psycho, Waffle house will do it.. 20 points no problem
Still love em scattered,smothered,and chunked.. Life is to short.
Gotta choose those battles better,,
:pop: This thread Is getting better by the hour. If this was a real attorney I would have to guess they would for all better reasoning be asking in a little better format or language.
The way this has been proposed from the start is way to demanding of something when there would have been a...
This forum does not allow a single user to have more than one username. If anyone wants to change their username contact an admin and it will be done. Multiple accounts belonging to the same member will be deleted without warning.