Search results

After using fine steel wool to knock off loose fiberglass, I used one 10oz. can of Minwax clear stain spray lacquer. Was able to get three healthy coats from one can with an hour drying time in between. The antenna sections smoothed out very well and now sealed. Mars is right about the...

Thanks folks! 73's

Good morning, Searched the Forums and did not find an answer to the following question. During maintenance I have removed an IMAX 2000 from my tower. Noticed irritations upon my hands when handling the antenna and appears the fiberglass is delaminating. The antenna is in real good shape and...

Thanks Folks, We'll be looking at the 811H. 73!

Asking about amplifiers. This antenna is just an interim.

Thanks Audio. Run a G5RV Multiband (102') flat @ 40' from W8AMZ . Have had some great QSO's to nearly 8K miles and most folks can't believe I'm on a wire. Thanks again!

Thanks so far Folks. Budget is less than a grand. Thanks again!

Good Morning, Have a ICOM 718 and looking into amplifiers. ICOM has their IC-PW1 but for $5K new, I won't be able to swing that. So what is out there that can get me anywhere from 500-1.5K watts, pretty much plug and play, and works with a variety of antennas (from omni's, beams, to...

and / or make available a modification kit for current Gain Master owners so it can be modified in the field... thanks for keeping us updated!

Try using this... VOACAP Online - professional-grade high-frequency (3-30 MHz) point-to-point propagation predictions Your welcome!

:laugh::thumbup:

As always... nice work Larry! :thumbup1:

I had a 4' Firestik with 5" magnet on my single cab F250. It sang. I now run a Wilson 1K magnetic on my F350 Crew. Can't hear it over my RCI.

1.21 jigawatts!

SSB mode? Yes Do you have the SSB (yellow) button depressed? Yes, this yellow button (Delay) also provides me with the most whiskeys. If it is doing this on AM, Yes, what do you have the un modulated dead key set at? Dead key on AM is 1w and swings to 28w when modulating. SSB is 0...

Finally got around to it and reports are very good with RCI 2950DX and Wilson 1K mag mount. One question is: I can hear the relay clicking quite a bit as I talk while keyed up. The relay seems to click more, the longer I modulate. Doesn't matter if low or high power. TS DX500 panel...

Being in AUS, your Tech Support would be much closer for the Yeti..... RCI 2950 DX second version is a smoking machine. Have one bone stock and aligned, and most folks think I'm running a base in my truck. Also mated to a Wislon 1K w/Cobra 350XL. Even more enjoyable is talking with your...

having them do a check first is nice but may not reveal the potential problems with these radios. my first radio lost the alc for ssb with the hour of usage. second radio had no audio ( speaker wire not soldered). this second radio is back in the shop and awaiting it's return...

that's the only place i have seen them. you could try tempest (master craigslist search). could try Amazon as it seemed for awhile they their suppliers we're only shipping the mount without whip, for the longest time at full price... <insert laughing smiley here> much luck

Thanks for the quick response and attached link Booty! 73's