Search results

the mic had all the wires broke in it , thats why i have to rewire it

it does but i am wireing the sra-158-4h connex/texas ranger mic for a stand 4 pin cobra radio

where does black go as it is got 5 wires in the mic it self

how to wire up a texas ranger /connex mic to 4 pin

i have this radio it look great with a blue swr meter in it , great talking base radio

my Galaxy SSB Melaka has the 99 board in it it only put out 4 watts now it puts out close to 25 on am , we replace the 1969 final which was bad , now it really gets out ,

i know own one these radios and was wondering what band is cb abcdef

nah it ant his only choice , they make a noise device that goes in line or make a balin , i have made a balin and use pvc pipe zip ties and coax and put it in the line works great , all so make sure your coax isn't touching ant thing on the tv

all right it will take me a bit as my truck is my current project

check all the diodes and the finals

its easy to rewire back to stock

the info below for president Washington .

ya need to check out what they have in mods for the 148gtl 5 pins same board , same mod s for modulation , ya can change a couple of diodes to up the modulation . MODULATION: Remove R104 or TR32 AM POWER: VR6 SSB POWER: VR7 "RX" METER: VR1 "TX" METER: VR10 SQUELCH: VR2 TX FREQ.: VR3 CARRIER...

They say its finals have given out check all the diodes and little parts on the board also may have a loss solder joint , to found if you have one get a plastic end screw driver , and tap the bottom of the board while radio is on , and if you find one fix the joint .

i agree with robb on that , i do the cover-ion to the mossfet 2030's n and f , instead of 20 watss you will get 40 or 50 depending on how you tune it

i posted the pictures so you guys could see the board and chip set

The 40 channel conversion the top pic and the board is on the bottom

ok thanks

other then internet where can you get those parts at , radio shack

what do you do if ya cant get the en-369fn at radio shack