You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
Yup, if trying to save a channel from vfo mode, the ht says "vfo mode error" instead of programming the channel in memory.
It happens whether you're on vfo a or b, and it doesn't matter if it has offset, tones, etc. it just won't take.
I had a similiar setup a ways back, I had to run a duplexer into the triplexer (basically it split my 2m/440 antenna line to separate 2M and 440 cables that went into the corresponding ports on the triplexer they shared above). then it comes out of that triplexer with one cable into your radio...
Thanks in advance for any tips and advice!
I'm looking into the best/cheapest and most effective way to end up with a duplexer that would allow a 2M/440 antenna and a separate 800Mhz antenna to feed one transceiver.
In my area I do a ton of work on 2M/440 in the mobile but also love...
My new and improved feed is up!
If you enjoy listening to non-stop police action check it out LAPD Citywide Dispatch & Code 3/Hot Shots
Thanks much
K1LA
I'm going to attempt to replace the resistor today using a hot air rework station and some syringe dispatched solder paste. I'll try to post pictures and the results later.
just ordered the 22kOhm resister from digikey that matches the one used in the unit from the factory (except for the value). Any tips on soldering it in? removing them seems straight forward enough but I've never added SMD components before. I hear there is certain resin paste that is helpful....
Yes, I'm assuming that it is the european version because the two I just bought new at HRO only have #5,6 & 7
I just removed them and will reset and see what they've done to confirm.
I just started the Yahoo Group for the ID-31
hoping it'll be a wonderful resource online of support and information
Please support by joining if you're interested in the ID-31 or own it
Join Here!!
Thanks!
I grabbed one yesterday before a trip back east figuring I'd make use of the gps and preprogrammed database.....I like the concept here but I need a few days to dig in a give you some real impressions, I haven't been super thrilled with the gps yet....but let's see how it performs this week
I was in the market for a great HF rig and wanted either the TS-480 HX or the IC-7000, after playing with both of them a while at HRO I got a lot of information about the better filtering and rx performance on the IC-7000 which ultimately drove me to the purchase. I've owned it two weeks now and...
hmmm...... could be a little late for that now that I've glued this thing in strong enough to outlast world war three. That being said, say I skip the powerpoles, would I just solder the connections in line? The radio side seems straight forward enough, red to red, black to black, but on the...
What a wonderful suggestion!
I've got mine built and ready to throw in line but (and I realize this may sounds stupid), I just am a little confused on the best way to connect. My wiring all terminates to powerpoles and comes direct from the battery --> powerwerx in line 15amp fuse --> radio...
This forum does not allow a single user to have more than one username. If anyone wants to change their username contact an admin and it will be done. Multiple accounts belonging to the same member will be deleted without warning.