You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
I have decent looking and working Korea era 25 GTL. Problem is the channel switch support on the bezel is broke and missing several pieces. No super glue fix for this one.
Anyways, just a bezel or an entire parts rig for the right price would be great. Hit me up with a PM if ya got something...
Hi all. Like the tittle states, anybody ever try them??? Wanting to get a better signal inside my 40x60 steel pole building. Have several buddies with the same setup with shops and garages. Signals outside are good, just a bit cold this time of the year in Iowa to stand out there!
I would need...
Hello folks. I have a little amp that I can not find much info on. Problem is on the power setting switch. 2 of the padding resistors are burnt/discolored and I don't trust the values my meter is reading. Nothing on CB tricks that I have found. Been burning thru the Google searches for a week...
I scored a cheap 29 LX from a truck driver at work. He claimed radio was working and lit up fine, then he heard a sizzle and radio shut down. Then he smelled the magic smoke.
OK.... can't loose for $10, even worth that in parts I thought. All protection diodes good yet no voltage to PCB...
OK folks, I got this off of the bay because I have never seen or heard of one! Only thing wrong was meter light was out. Replaced that with a 5mm warm white LED. looks just like an incandescent now! Cool beans. Then I did a full recap just cuz I do not know the history of its use... hot/cold...
Howdy folks. Again, please check the pics carefully.... never know what you may be getting!
Now, in NO way is this to bash the seller and/or eBay. I am NOT affiliated with the seller at all. This is just to remind people to keep them eyes peeled...
Afternoon folks. I'm looking for the thread size and pitch for the nylon audio IC screws and TO-220 transistor screws. I need to get some in bulk. I think they are metric..? Any feedback welcome. Thank you.
Another gem on the bay. But, no clarifier? Never seen this model before either. Thoughts???
https://www.ebay.com/itm/Cobra-132-A/223058542066?hash=item33ef533df2%3Ag%3AlGQAAOSw1LRaz5kw&_sop=16&_pgn=2&_sacat=40054&_nkw=cobra&LH_ItemCondition=7000&_from=R40&rt=nc
Hello all. I have an older President Jackson, non DX version, here that some previous person tried to mod the clarifier as far as I can tell. A few wires from the said clarifier potentiometer were cut but were repaired back to OEM. Pin 1 of PLL had solder blob on the component side. I removed...
Howdy folks. I have said radio in title on the bench and have no mic for it. CB Tricks shows this rig has a standard 4 pin. My JFK has factory 6 pin. Does anybody have the proper pinout? Does this radio have the same pinout as the Lincoln II, Grant II or similar? Thank you much in advance.
Hello all. I have a President HR2510 that I am trying to bring back alive from a hack. Various mods that I wish to eliminate. Someone tried the open clarifier mod and snipped diode 150 right in the middle. I have been trying to look on CBtricks at the schematic and for the life of me can not...
Good day gents and ladies. I have a 2006 Cobra 25LTD with the YD1022 audio ic that has suffered the overheating crack of doom. This is a fleabay rig I got on the cheap. Here is where it gets interesting.... the plastic screw that holds the ic to the chassis has broken. No nut and stub left...
Hello gents and ladies. I have tittle said radio and Q18 has been removed. I can not find a schematic on this rig so went with the Cobra 29 chassis on the net and on 2 repair radios I have here now. This shows TR18 as a 2SA733. Am I correct to assume this is the proper transistor for this...
Hello again folks. I have an older Cobra 25LTD classic, 6-'91 made in Philippines, that has main board PC-417AJ. I just recapped it with all Nichicon, new meter, case covers with new speaker and aligned it. My question is, what 2 digit segment does it require for replacement? The original one...
This forum does not allow a single user to have more than one username. If anyone wants to change their username contact an admin and it will be done. Multiple accounts belonging to the same member will be deleted without warning.