• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Search results

  1. R

    Copper, I must admit..

    I've bought from coppers for about seventeen years now radios,antennas etc.. never had a problem with them
  2. R

    more rides!!

    Like the rides the Z71 is my favorite
  3. R

    cobra and galaxy

    Nice looking radios like the blue lights
  4. R

    Rotor cable

    where i'm at is kinda in a valley and i have a pretty big hill behind the house so i had an idea about doing a beam install on it. its probably more than it would be worth but its an idea
  5. R

    Rotor cable

    Has anyone here ever tried running rotor cable a long distance like 500+ft i've heard after so many feet you will have voltage problems. didn't know if it was possible or if there where any tricks to it.
  6. R

    palomar 300a

    thanks for the input i'll give it a try if i can find a dummy load been real busy this past week so i ain't had much time to check it out
  7. R

    Wilson 1000 or 10K ?

    I have a 10k mounted on my tool box and it does great its the best antenna setup i've had on my truck
  8. R

    palomar 300a

    i have a jb200 driving the low side of a palomar 300a on channel one i'm seeing 750 watts peak on a dosy meter and on channel fourty i'm seeing around 550 watts i was wondering while there is such a difference between the two channels
  9. R

    dual alternator brackets

    Does anyone know where you can find these for a dodge truck.I've seen them for ford and chevy but not dodge
  10. R

    Imax and a tree?

    I had a a99 with gpk in the top of a tree and replaced it with a imax2000 with gpk never had no trouble from either antenna i had 20ft of mast 10ft to get above the tree and 10ft to clamp to the tree i used both metal bands and regular mast clamps with lags.I ran a heavy gauge copper wire from...
  11. R

    600hd

    I've seen some places that sell 4 gauge kits but i wasn't for sure if it was big enough i'll need about 12 ft
  12. R

    600hd

    What size power cable would be the best to run this amp and where can you find it
  13. R

    s9

    I was thinking about getting a s9 but can the wattage be turned down enough to run with a x80 driving a 600hd.
  14. R

    My station and Texas holdem tables I build

    Now thats a beam I know a guy who had a laser 400 he ran it for years really liked it but it got took down in a big ice storm a few years ago.How high is yours up.
  15. R

    Rejection Wire

    Yeah the reflector wire the wind got ahold of it i guess.It came off two of the elements and is just hanging there.I'm not for sure if theres a better way of putting them on or not.
  16. R

    Rejection Wire

    Can anyone tell me if the rejection wire on a beam came loose from the elements if that would cause a high swr. I'm still kinda new with beams.
  17. R

    Galaxy 77

    I've had the radio for about three years i think the meter will work a little on receive it will go to a 2 unless your sitting close to whoevers talking on transmitt it works fine. I talked to a tech he said it could be something in the radio that went bad or the meter its self could be going bad.
  18. R

    Grounding a beam

    Thanks guys for the info so its best to run more than one ground rod from it as for soil i know its mostly clay in that area i guess thats why they call it clay township
  19. R

    Grounding a beam

    I just put up a moonraker4 and was wondering whats the best way to ground it also if grounding it and the radio may help cut down on the noise
  20. R

    palomar 300A

    I drive my 300A with a JB200 on the low side works great