Search results

I tried my Icom 718 with my Yaesu 2100B. Did not work well for me.

Transistor Hey Shockwave...thanks so much! That transistor was the culprit. I guess even with the antenna and radio both grounded things like this still happen. I will be sure to disconnect my antenna whenever possible during thunder storms.

Thanks for the replies guys. Bulb is good and last year I gave the radio the once over and replaced the old caps and cleaned the relay. I'll check the relay again and check the audio board.

My radio was working fine up until recently. My transmit is fine but the audio on my receive is very low and the meter does not move at all in the receive mode. We've had some lightning storms recently. Don't know if that could have damaged the radio? I hooked another radio up to the antenna and...

I picked the amp up on ebay. I was shocked when I opened it up to see that there was hardly any dust inside and that the contacts on the band selector were like new. The front face still has the plastic over it. It seems that this amp was not used much. The door knob caps are in great shape! I...

OK guys...The radio is NOT modified and only puts out 40 watts on AM and yes I would be crazy to try and get more out of it especially when I have a 101E. Why anyone would want one of these radios for CB is beyond me. Why would anyone pay the money for a 718 for CB use with all those frequencies...

OK...thanks to all those who have replied! I was use to tuning with the Yaesu 101E. The Icom is a different animal. Apparently the Icom does not have enough output to tune the amp in CW or AM mode. When I tuned in SSB mode while speaking in to the mic I got output, but only could tune to about...

The relay buffer is working because the relay in the amp engages and the DC A gauge moves, just no output? I guess the two are just not compatible?

When the amp is in the stand-by mode I have output. When turned on I have no output. The amp works fine when hooked up to my Yaesu 101E. Could it be that the Icom does not have enough output to drive the amp?

FL-2100b No Output My 2100b amp works fine with my 101 rig. I hooked the amp up to my Icom 718 using an external relay buffer and it keys the relay in the amp but there is no power output. I was told that I would not need the ALC voltage. Any ideas on what I need to do?

Battery Solved the problem. Seems that the battery I was using was too low. When I put a fresh battery in the squeal stopped. Sideband will work without a battery but not AM.

Gain Pot Sorry...on this mic the pot IS outboard and NOT part of the actual circuit board.

TUG8 This particular one has the gain pot soldered to the board unlike my 2 other D104s that use an outboard pot.

Anyone Have An Answer? Any educated guesses?

I wired up one of my D104 mics to my Icom-718 and I was surprised to see that it works WITHOUT a battery! How can that be? Also it performs well on SSB but on AM I can hear a squeal coming from inside the radio when keyed even if the mic element is removed from the mic base. I hooked a battery...

Does anyone know if or how one would connect an Icom 718 radio to a Yaesu FL 2100B amp?

Antron 99 vs Wire Dipole I strung a 33' long dipole out today and was checking its performance on 10-20 meters. I compared it with my Antron 99 and the Antron had a full 4db receive gain on 15 meters over the wire dipole tuned with an Supermatch antenna tuner! If the Antron is tuned for 11 how...

Thanks for the feedback guys. But doesn't the horizontal need to be high off the ground? It would only be 10 ft up in the hedges and I would be working 10 - 20 meters. Is that OK? I just want a center feed single wire.

I was going to build this one. Do you feel this would out-perform the horizontal wire? Vertical Dipole - 10 Through 20 meters - One Half Wave or Longer - KL7JR

Hey Guys, I want to build a dipole antenna for 10 - 20 meters that I'll be using with a tuner. Out of these 2 options which do you think would work best? Using 1/2" metal conduit and making a 30ft vertical (15ft each side) or running wire horizontally through my hedges that are 10ft above...