• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

galaxy saturn base VR's


depending on the condition of the finals and driver, I would expect between 35 and 40 out of that radio. If its an older radio with all original parts, then 25-30 is a fair expectation. If it is only doing 20 peak, then set the key for about 5 watts. (4:1 ratio)
 
orignal galaxy saturan [not 2517 version]
vr14-modulation set to max or a tad under
vr13-am high dk-i set to 8 but no more than 10 watts
vr16-am low dk-2 watts
vr12-ssb alc iset mine generally 3/4 ways up.ssb warble may
start if ya max it out.i wouldnt max this out.also i do this
on cb ch.20 seem to balance out power.use a dummy load
also if ya have one,if not i ould get one thier inexpensive
and work great.
 
  • Like
Reactions: UNCjason
na it not on the board this one is old.and is just loaner from a friend.

must have had to many screw drivers in it. the low rf power wont ajust. LOL make my 8 pill cadillac along at 100 swinging 300.

will be sending the 2995dx off to ranger probly next week. :(
it only lasted 2 weeks after the lightening hit. then it let out the smoke.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • dxBot:
    Tucker442 has left the room.
  • @ BJ radionut:
    LIVE 10:00 AM EST :cool:
  • @ Charles Edwards:
    I'm looking for factory settings 1 through 59 for a AT 5555 n2 or AT500 M2 I only wrote down half the values feel like a idiot I need help will be appreciated