WorldwideDX Amateur Radio Forums

WorldwideDX Amateur Radio Forums (http://www.worldwidedx.com/forums.php)
-   Yaesu (http://www.worldwidedx.com/yaesu/)
-   -   Yaesu FT-2000 11 meter modification. (http://www.worldwidedx.com/yaesu/48947-yaesu-ft-2000-11-meter-modification.html)

505 03-11-2010 05:00 PM

Yaesu FT-2000 11 meter modification.
 
I am a new HAM, I just bought a Yaesu FT-2000.
I am wondering if this radio can be modified to
transmit on the CB channels. I understand that
I should use only 4 watts. My problem is I miss
my many friends on the CB.

Is this modification possible? Where can I find
instructions. Old friends are hard to walk away
from, and I have room for only one radio.
:unsure:

Happy_Hamer 03-11-2010 06:42 PM

1 Attachment(s)
try this

505 03-11-2010 07:18 PM

FT-2000 Modification
 
Thankyou very much as soon as I can I will try this.
:thumbup:

HI8EES 05-06-2010 04:30 PM

Modificacion FT-2000
 
Quote:

Originally Posted by 505 (Post 186227)
I am a new HAM, I just bought a Yaesu FT-2000.
I am wondering if this radio can be modified to
transmit on the CB channels. I understand that
I should use only 4 watts. My problem is I miss
my many friends on the CB.

Is this modification possible? Where can I find
instructions. Old friends are hard to walk away
from, and I have room for only one radio.
:unsure:

Hola a todos
Esta modificación consiste en ampliar la gama de frecuencias de la Yaesu FT-2000.
Rango de frecuencia RX / TX: 1.8-30MHz, 50-54MHz.
En primer lugar, Apague la mainswitch en la parte posterior y desconecte todos los cables del transmisor-receptor antes de empezar a modificar la radio ..
1. Gire el transmisor-receptor de cabeza, de modo que la parte inferior de encubrir será hacia arriba y el panel frontal hacia usted.
2. Desatornille la cubierta inferior. 3 tornillos grandes en cada lado de la radio, y algunos más pequeños en la parte inferior. (Ninguna necesidad de quitar los 4 pies)
3. Retire la tapa inferior, verá otra cubierta superior fijada con tornillos 15 .. Mire la imagen inferior

4. Desatornille la tapa en blanco con los 15 tornillos.
5. Cuando la tapa retirada, busque la sección de puente JP30XX una la parte delantera izquierda (rodeado de color amarillo) Véase la imagen de abajo

6. Localizar ubicación 04 de la soldadura este puente con sólo una gota de soldadura. Mire la imagen inferior

7. Volver a montar la radio, cuando se hace conectar todos los cables. Y a su vez en el mainswitch en la parte posterior.
8. Pulse la tecla [FAST] + [LOCK botones] al encender la radio, esto provocará una reconfiguración completa de la radio, pero se iniciará en la radio de banda ancha TX.
9. ¡Terminado! Ahora debería ser capaz de transmitir a través de la gama de frecuencias de 1,8-30MHz, 50-54MHz.
¡Buena ,Quisiera poder enviarte fotos de esta Modificacion ,a tu direccion de e-mail ,escribeme a esta hi8ees@gmail.com

HI8EES 05-06-2010 04:36 PM

Modificacion FT-2000
 
Hello to all This modification consists of extending the frequency range of Yaesu FT-2000. Rank of frequency RX/TX: 1.8-30MHz, 50-54MHz. First of all, It extinguishes mainswitch in the later part and disconnects all the cables of the transceiving one before beginning to modify the radio. 1. It turns the transceiving one of head, so that the part inferior to conceal will be upwards and the frontal panel towards you. 2. It unscrews the lower deck. 3 great screws in each side of the radio, and some smaller in the part inferior. (No necessity to clear the 4 feet) 3. It retires the cover inferior, will see another upper deck fixed with screws 15. It watches the image inferior 4. It unscrews the cover in target with the 15 screws. 5. When the retired cover, looks for the section of bridge JP30XX one the left front part (surrounded by yellow color) Sees the image of down 6. To locate to location 04 of the east weld bridge just by a drop of weld. It watches the image inferior 7. To return to mount the radio, when it is made connect all the cables. And as well in mainswitch in the later part. 8. [FAST presses the key] + [LOCK bellboys] when igniting the radio, this will bring about a complete reconfiguration of the radio, but it will begin in broadband radio TX. 9. Finished! Now it would have to be able to transmit through the frequency range of 1,8-30MHz, 50-54MHz. Good luck! my e-mail is hi8ees@gmail.com In order to be able enviarte fos of this modification escribeme to this email.

tecnicoloco 05-07-2010 11:07 PM

Las fotos ya estan contenidas en formato pdf (Adobe) en el post #3.


73 de Tecnicoloco


All times are GMT -7. The time now is 10:32 PM.

Powered by vBulletin®
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0
Worldwide Radio Forum