1. You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
    Dismiss Notice
Dismiss Notice
This forum does not allow a single user to have more than one username. If anyone wants to change their username contact an admin and it will be done. Multiple accounts belonging to the same member will be deleted without warning.

Upper Matching Section after bending

Click on the photo to start tagging. Done Tagging

In This Album

Soft Copper Tubing After Riveting 14 AWG Copper Wire Picture showing alignment of antenna sections Soft Copper Tubing Ready for bending 5" Piece of 14 AWG Wire Stripped Top and Bottom Sections Mated Lower Matching Section Wire with Ring Terminal and Heat Shrink Antenna sections cleaned up and ready for soldering Picture showing sections after soldering Detail of Lower Matching Section ready for Mounting Upper and Lower Antenna Sections Mated by the Female Coupler 5" Wire Soldered and Heat Shrunk onto SO-239 connection Upper Matching Section after bending Top Cap Soldered on SO-239 Connection Riveted onto the Milford Hanger Lower Matching Section after final assembly - left
  1. Marconi
    Hey Peter do you think this is a collinear phasing coil for the 2 meter portion or does it work to allow the antenna to be multi-band?


Share This Page

  • About Us

    The WorldwideDX Radio Forum was originally established in 2001. We pride ourselves on welcoming Radio Hobby enthusiasts of all types, while offering unbiased, informative, and friendly discussion among the members. We are working every day to make sure our community is the best Radio Hobbyist's site.
  • Like us on Facebook

  • Premium VIP Member

    The management works very hard to make sure the community is running the best software, best designs, and all the other bells and whistles. Care to buy us a beer? We'd really appreciate it!

    Donate to us!