• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

WHICH BEAM ANTENNA IS WORTH PUTTING UP??

Last edited:
I'm glad you fellas like your Signal Engineering antennas. I've built several quads over the years and they've always done well.

Signal Engineering does have some flat-out wrong info about the way antennas work in general though (such as no f/b on a directional antenna with no reflector!), so take their "theory" with a grain of salt.


Rick
 
I'm glad you fellas like your Signal Engineering antennas. I've built several quads over the years and they've always done well.

Signal Engineering does have some flat-out wrong info about the way antennas work in general though (such as no f/b on a directional antenna with no reflector!), so take their "theory" with a grain of salt.


Rick
Forget the theory. I am going off Real World experience. My Signal Engineering 6 element quads WORKS...
 
Well, that's good, and it should. It's hard to make a quad or delta loop not work, honestly. They're great antennas, and if you don't mind dealing with a skyhook that has 3 dimensions, they're hard to beat.

I did email them (politely) about the misinformation on their website a couple of years ago. Never heard back from them and they haven't changed it.
 
Jcox$$$,
The date and time sent can be found near the bottom of each post. It is in light grey and a little difficult to see.

Welcome to WWDX. (y)
 

dxChat
Help Users
  • No one is chatting at the moment.
  • dxBot:
    Tucker442 has left the room.
  • @ BJ radionut:
    LIVE 10:00 AM EST :cool:
  • @ Charles Edwards:
    I'm looking for factory settings 1 through 59 for a AT 5555 n2 or AT500 M2 I only wrote down half the values feel like a idiot I need help will be appreciated