• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Wire strength question


Probably, but you do not include enough info for us to help you. Do you live where ice is prevalent? Are you using a center support, or no? Solidly tied, or springs, weights? Indoors or out? High winds? Type of supports? (ie: trees or towers, poles, etc...) Permanent or temporary? More info means better answers.
 
Will be between trees, will use center support if i can but most likely not. I live in central Kentucky we do get ice from time to time. Might use springs but unshure what size to use. I was thinking 18 gage was pretty small but the antenna builder says it is strong enough.<spelling?? I hate to buy it and it break the first time we get a big wind. By the way i'm talking about an 160 meter ocf windom. Thanks for the help.
 
It should be strong enough. Copperweld is some strong stuff. I would have no doubts about it being large enough for an 80 meter antenna. Never having had a 160 meter antenna made from Copperweld, I can't say about that for sure, though.
Depending on how the thing is stung up in trees, a pulley and weights, or a strong spring on each end would be a good idea. That should take care of any tree movement. Couldn't say how to measure the strength of a spring, but can tell you about those weights. Hang enough weight on the end of the rope so that the antenna hangs pretty 'flat'. Maybe a three or four foot 'sag' in the middle, something close to that. The pulleys used ought to be sort of large too, around 4 inches in diameter, or so. Smaller pulleys tend to not 'spin' fast enough and can bind, which is a very good way to snap the wire. Regular maintenance is a very good idea with them too (grease).
- 'Doc
 
I prefer garage door springs. Lots of stretch, and the farther you stretch them, the stronger they pull, so you have a LOT of adjustment. Any good hardware has them fairly cheaply.
 
Last edited:

dxChat
Help Users
  • No one is chatting at the moment.
  • dxBot:
    Tucker442 has left the room.
  • @ BJ radionut:
    LIVE 10:00 AM EST :cool:
  • @ Charles Edwards:
    I'm looking for factory settings 1 through 59 for a AT 5555 n2 or AT500 M2 I only wrote down half the values feel like a idiot I need help will be appreciated