• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Uniden Washington - No SSB Transmit

Robb

Honorary Member Silent Key
Dec 18, 2008
11,432
3,651
323
Silicon Valley CA, Storm Lake IA
Transmits/receives fine on AM.
Just no transmit on SSB.

Any particular common problem part/area?

This is the 8719 PLL version of the Washington - BTW.
:headbang
 
Last edited:

They say its finals have given out check all the diodes and little parts on the board also may have a loss solder joint , to found if you have one get a plastic end screw driver , and tap the bottom of the board while radio is on , and if you find one fix the joint .
 

dxChat
Help Users
  • No one is chatting at the moment.
  • dxBot:
    Tucker442 has left the room.
  • @ BJ radionut:
    LIVE 10:00 AM EST :cool:
  • @ Charles Edwards:
    I'm looking for factory settings 1 through 59 for a AT 5555 n2 or AT500 M2 I only wrote down half the values feel like a idiot I need help will be appreciated