• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Made a Moxon

Mox20M_zpsc85de9fc.jpg
 
The program seems to calculate the wire lengths too long for the resonant frequency, so be sure to make it in such a way as you can shorten or lengthen each wire as needed to fine tune it.
 
That would make a real nice hilltopper. Nice job homer!
Yep.
The poles are extendable/retractable and a wrap or two of tape on the sections joints would keep them out when using the antenna. Marking the wires at each exact corner would make it really easy to put in the air.

Not having the poles taped or shrink wrapped to the spreader tubes would allow for quick removal/assembly of the pole spreaders and allow the antenna to be carried about in the car of even a modest sized automobile.
 
Very cool project. I've been messing around with the MFJ 10 meter moxon for the last month and I've found it's footprint is smaller than the Maco V Quad and I'm getting better rejection and it's signal is more horizontal.

I think for those looking for a small beam the 11 meter moxon is a great choice.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • dxBot:
    Tucker442 has left the room.
  • @ BJ radionut:
    LIVE 10:00 AM EST :cool:
  • @ Charles Edwards:
    I'm looking for factory settings 1 through 59 for a AT 5555 n2 or AT500 M2 I only wrote down half the values feel like a idiot I need help will be appreciated