You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
Hope that I have put this in the correct forum. I picked up this B&K 2040 recently and it all seems to power up and all modes operated. My question is where can I send it to and have it checked out and calibrated.
Thanks for the info and manual. My problem is finding a decent shop and not a hack shop near me. Only have one cb shop nearby and have heard of bad stories from it. Have contacted B&K and was told they no longer service them as they were dscontinued back in 1978.
Well I have spent part of the day checking around with different TV & electronic repair places and haven't had any luck. Looks as if I might be on my on with trying to check the calibration.
From reading the service and operator manual it lists these items that are needed to calibrated the 2040.
RF Millivoltmeter (Boonton BD92)
Freq. counter 28mhz , 1 ppm
Oscilloscope 28mhz with 10x probe
I'm looking for factory settings 1 through 59 for a AT 5555 n2 or AT500 M2 I only wrote down half the values feel like a idiot I need help will be appreciated
This forum does not allow a single user to have more than one username. If anyone wants to change their username contact an admin and it will be done. Multiple accounts belonging to the same member will be deleted without warning.