• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

General Lee Alignment info

Cheech

Active Member
Apr 6, 2005
716
6
28
35
Medina county Ohio
Looking for the full alignment info for mosfet general lee. One of the local hack shops had their hands on it and its pretty screwed up!

Also was wondering why the voltage regulator is getting extremely hot?
 

check the bias voltages and make sure the dead keys are not set too high. this can cause the components to get hot if set too high.
 
I set the bias voltage. It was set a bit high. Dead key on low is 1 watt and on high its 4 watts.

The AM Mod amp transistor is still getting really hot. Even at a dead key it heats up to the point you can't touch it.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ Wildcat27:
    Hello I have a old school 2950 receives great on all modes and transmits great on AM but no transmit on SSB. Does anyone have any idea?
  • @ ButtFuzz:
    Good evening from Sunny Salem! What’s shaking?
  • dxBot:
    63Sprint has left the room.