Yes they do but if your here in the US my price is better with the postage insurance included. Dave at Yeticom is the one who sent them to me for sales
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
maxlog M-8800
- Thread starter vkrules
- Start date
I always thought 91dd218 was Dave at Yeticom and Bill from Escondido California was Magnuman, guess I was confused
Hi at last my radios here had a play with the settings ,
its cool, got to wait for the aerial man to come round thoe .
Hope hes not to expensive
its cool, got to wait for the aerial man to come round thoe .
Hope hes not to expensive
Out of the Anytone AT-6666, Maxlog M-8800 v.8, and President Lincoln II v.3 I'm starting to think the Maxlog receiver is the nicest on the ears. All three are very close in sensitivity and I don't know if it's just the larger speaker but the Maxlog seems to be the most pleasant for listening.
While the styling and some of the format for the controls (similar to the Anytone) aren't my favorite, the radio is dead on frequency, has good wattage out of the box, and because of the larger size and knobs is very user friendly.
While the styling and some of the format for the controls (similar to the Anytone) aren't my favorite, the radio is dead on frequency, has good wattage out of the box, and because of the larger size and knobs is very user friendly.
Hi ,aerial up radio on, got some questions about the maxlog
When on f band why when freq display shows 27.125
I key up the freq changes to another freq why does it do this ?
Thanks
Dom
When on f band why when freq display shows 27.125
I key up the freq changes to another freq why does it do this ?
Thanks
Dom
probly turned the clarifier while transmitting,, key up and turn the clarifier back to 27.125
or someone was programming the freq with a pc and put the wrong freq in for the transmitt
Factory also could have done that checking for memory and channel stability, they all seemed to come from the factory with no issues so someone really took their time making sure they were working correct when them left there.
looks like it could be for split when change up or down the transmit freq changes as well
Guess I need the usb cable . Is the anytone 5555 cable the right one for max ?
Guess I need the usb cable . Is the anytone 5555 cable the right one for max ?
You should be able to set the clarifier to xit from the front panel and set it back on frequency.Then switch clarifier back. Quicker to due with the cable though.
Hi , yes I sorted it had to key the mike while I went through the freq's .
It was a bit confusing as there is 3 seperate settings for the califier lol .
Think ive set it right now lol .
Another question when I switch echo on I get feedback out of the speaker another cb'er said it might be talkback is on if so how do I switch it off ?
Thanks
Dom
It was a bit confusing as there is 3 seperate settings for the califier lol .
Think ive set it right now lol .
Another question when I switch echo on I get feedback out of the speaker another cb'er said it might be talkback is on if so how do I switch it off ?
Thanks
Dom
Yes the talkback can be set to only come on when using echo.Press and hold the func key and go back into the menu and turn the talkback off. I'm working from memory. I don't have a 8800 sitting here at the moment and can't remember what it's called, but there is two settings one for standard talkback and the next item is the talkback with echo.
hi , is tx mon the talkback setting if so I turned that off then switched radio off then back on problem gone .
Its the only setting I could see that might have to do with talkback .
Its the only setting I could see that might have to do with talkback .