• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

HamGadgets ID-O-Matic IV

W6CDA

Active Member
Sep 5, 2014
12
5
33
43
Long story short: I got it to work with my FT-530 in CBR; got it to work with my D710 (NOT in LBR); but it will not work in LBR because Mic gets muted during CBR/LBR and also mutes Mic input on the data jack, so it inhibits the ID-O-Matic from keying down. I know most everybody out here either has a TS-2000 or a V71; but I'm pretty sure the architecture of the D710 and V71 are pretty close. Anybody else have any experience with this or knows if there is a work around?

Thanks.

Here is how I wired the ID-O-Matic to the D710. I suplied power to the IDOM from an external source.

D710 IDOM4
Pin 1 (PKD) to I/O 11
Pin 2 (DE) to I/O 12
Pin 3 (PKS) to I/O 3
 
  • Like
Reactions: kk6hdu

I would very much like to connect this to my TS2k and my V71 - if anyone figures it out let me know!
 
dxChat
Help Users
  • No one is chatting at the moment.
  • dxBot:
    Tucker442 has left the room.
  • @ BJ radionut:
    LIVE 10:00 AM EST :cool:
  • @ Charles Edwards:
    I'm looking for factory settings 1 through 59 for a AT 5555 n2 or AT500 M2 I only wrote down half the values feel like a idiot I need help will be appreciated