• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

hope this is the right place to post this


It should hook up like this. Colors are for the Shure mic cord
shure2icom.png

- 399
 
  • Like
Reactions: Mudfoot
http://homepage.ntlworld.com/rg4wpw/date.html#icom
http://homepage.ntlworld.com/rg4wpw/astaticbook.pdf

http://cdn.shure.com/user_guide/upload/450/us_pro_526t_ug.pdf

Your most likely correct 399...ICOM uses many configurations...sometimes Pin 1 or 2...sometimes more than one pin has voltage......
Here's a good link to identify many specific models...
Never used the 718...So my bad for not checking.
I have known op's that have caused damage to their ICOM rigs and/or mics trying to make hook-ups...
All the Best
Gary
 
Last edited:

dxChat
Help Users
  • No one is chatting at the moment.
  • dxBot:
    Tucker442 has left the room.
  • @ BJ radionut:
    LIVE 10:00 AM EST :cool:
  • @ Charles Edwards:
    I'm looking for factory settings 1 through 59 for a AT 5555 n2 or AT500 M2 I only wrote down half the values feel like a idiot I need help will be appreciated