I am in need of a schematic for a ranger 2527. Its display intermittently will not come on when you turn the radio in. If you turn it off and then turn it back on it displays.
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
RCI 2527 schematic
- Thread starter Cpt shakes
- Start date
here is the service manual for the 2527 radio. assume you meant galaxy.
http://www.cbtricks.com/radios/galaxy/dx2527/index.htm
http://www.cbtricks.com/radios/galaxy/dx2527/index.htm
Well, I trust it down to the display bored. The voltage stays to the display bored but sometimes when you turn it on it does not display frequency. Now I have to look and see if that board is available. Thank you so very much for the assistance. Hoo rah
before I did any thing else I would check for a cold solder joint at the board. by turning it off and back on will kind of surge the power so it could have a bad solder joint where it hooks to the main board or on the board for the freq counter.
rfparts carry's some parts for the board you are looking for. I have needed parts and even called them and it would not be on their web site but they would have the part.
rfparts carry's some parts for the board you are looking for. I have needed parts and even called them and it would not be on their web site but they would have the part.
here is what rfparts is showing. give them a call if the plugs are good or you can not find a bad solder joint.
https://www.rfparts.com/galaxyradioparts/galaxy-freqcount.html
https://www.rfparts.com/galaxyradioparts/galaxy-freqcount.html
Thank You Sonoma for the reply. I traced it down to the display board. I have RF Parts as an icon on my phone and use them quite often. I have not called them yet.