• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

White residue inside Stryker 955 lcd panel

I'd be chasing that up too . Those radios aren't cheap , and you don't expect those types of issues from new .

Id have no radios if I send this back to Stryker for "repair". The 2970N4 is out for repair currently. Funnily enough, I received an automated email from Shawn at Stryker asking me how Im getting on with the new radio. Albeit I ignored it.
 
I would pursue warranty service. If you spent money for it you deserve a new unblemished radio. Would you accept a new car with a stone chipped or cracked windshield? I know I would not. I would raise so much hell they give me what ever I wanted just to get rid of me.
 
I would pursue warranty service. If you spent money for it you deserve a new unblemished radio. Would you accept a new car with a stone chipped or cracked windshield? I know I would not. I would raise so much hell they give me what ever I wanted just to get rid of me.

I was just hoping he'd send me a front unit and I'd send him back this front unit, probably was asking for too much or probably as with anything else in the CB business the user damaged it attitude.
Well like I mentioned earlier, my attempt to spray compressed air per advise given by him ( not blaming him ) caused a slight crack now in the top right corner of the display glass. So now, the dust looks worse and ive a slight crack in LCD. IMG_20170812_005310.jpg
 
I was just hoping he'd send me a front unit and I'd send him back this front unit, probably was asking for too much or probably as with anything else in the CB business the user damaged it attitude.
Well like I mentioned earlier, my attempt to spray compressed air per advise given by him ( not blaming him ) caused a slight crack now in the top right corner of the display glass. So now, the dust looks worse and ive a slight crack in LCD.
If the new crack is in the LCD it might fail in the future. I would still try for the replacement. I would now bypass the shop where it was purchased and go straight to the manufacturer. They don't want unhappy customers blasting their backside on public forums.
Give us a Call
If you are experiencing technical difficulty with the website or have any question about using and our products. Please refer let us know.

910-221-1086


AVAILABLE AT 10AM – 6PM
 
All this talk about black list and white listing firms . If anything Stryker radios should be on the blacklist. Any organizations value are guaged by their after sales service. If after sales service does not exist then the firm should not exist in the long run. Failing that, sell me a product with an option of "sold as seen" with it being reflected in the price. Else, dont give me false hopes of a warranty when none exists.
 
All this talk about black list and white listing firms . If anything Stryker radios should be on the blacklist. Any organizations value are guaged by their after sales service. If after sales service does not exist then the firm should not exist in the long run. Failing that, sell me a product with an option of "sold as seen" with it being reflected in the price. Else, dont give me false hopes of a warranty when none exists.
limey can you email me yeticomnz (at) gmail(dot)com ..wish to talk in private ..
 
This is for the muppet on the blacklist facebook page I posted on, since he said his piece and locked the thread without allowing me to say my response. Another dictator driven by financial gain no doubt :

David Roehn wrote:
It was shown to me that Stryker has mailed out replacement parts and that you've been busting their chops on wwdx about it. You're getting what you want so I don't see the need to keep going on about something that's been handled. On a side note, it looks like you blasted that pretty hard with air.. Enough to break it. As far as the blacklist page is concerned this is a closed topic.


Indeed, Stryker did write me an email informing me of posting me the part in question, however this was not until after I wrote on your blacklist facebook page. So next time be nice and dont assume that Im just "busting Strykers chops" for the sake if it. Cheers I have the email he sent me which you could have asked for. Also, if you were Savvy to the email Shawn sent me, he advised I use compressed air. Shame you dont have the dignity to even want to hear my side of the story before you lock the post. I guess this shows to me that you are indeed not as neutral as you make out to be.

And Yetti , did you copy and past what you copied and pasted to me on Messenger earier to this David Roehn chap ? If so, cheers buddy- where I come from this is called shit stirring. You could have asked me for the copy of the email Shawn sent me. This would have shown to you and your buddy David Roehn , that Shawn only sent this email after I wrote on the FB blackist page. Not after , like what you and David are saying, or in his own words, "busting their chops " for no reason since he sent me the part already.
Oh, and just out of interest, any reason why you were so interested in my issue with Stryker ? Perhaps I should have asked that question to myself before engaging in communication with you and your first message in Messenger to my was a screen shot of message Shawn sent you, I guess Im too stupid to see the warning sign.
 
Last edited:
21 hrs ago i posted that screen shot i showed you to a group in relation to the matter in the first part of it ..over 2000 people have seen that post and its old news ...that was 2 hours before you even posted on BL ...so draw you own conclusion
and agian 8 hrs ago ..and the admins of that group also saw it in messager around then also as we have a group message going ..you are not the only subject in that screen shot as you well know
yes david has been talking to me ..he does every day .
the thread was locked for 7 mins..yes 7 mins ..and you ran over here to jump up and down ..david even said to me in messager before he unlocked it that he had remorse for doing so
..sigh
 
21 hrs ago i posted that screen shot i showed you to a group in relation to the matter in the first part of it ..over 2000 people have seen that post and its old news ...that was 2 hours before you even posted on BL ...so draw you own conclusion

Im not sure what you are refering to . I am merely saying I find it pretty coincidental that you initiated a FB message chat with me, which I accepted, I notice a screen shot of what appears to be a conversation between you and Stryker as the first message sent to me by you. That in itself from a moral stand point is a no no. You basically copied a chat you had with Stryker and showed it to me, why would you do that? I dont understand.

Then this fella called David Roehn closes my post, stating that Stryker has already sent me a part and he cannot understand why I would be busting Strykers chops when the matter has been resolved. Well of course, it was not resolved. Since I received the email from Shawn only after I posted about black listing his firm on that FB page.


I will say this again. I am just a consumer with no vested interest in any firm.
 
Im not sure what you are refering to . I am merely saying I find it pretty coincidental that you initiated a FB message chat with me, which I accepted, I notice a screen shot of what appears to be a conversation between you and Stryker as the first message sent to me by you. That in itself from a moral stand point is a no no. You basically copied a chat you had with Stryker and showed it to me, why would you do that? I dont understand.

Then this fella called David Roehn closes my post, stating that Stryker has already sent me a part and he cannot understand why I would be busting Strykers chops when the matter has been resolved. Well of course, it was not resolved. Since I received the email from Shawn only after I posted about black listing his firm on that FB page.


clearly you have not gonna the fact i have tried to help you with your situation ..its ok i get that as for the screen shot its mine to do with its not a third partys screen shot its directed to me about you (the last half) in fact a few here have tried to help you but it seems you dont want it ..ok no problem
want to see where i told shawn of this thread in the first place to help you?..the one that was in messenger just before his comment?

:whistle:
 
clearly you have not gonna the fact i have tried to help you with your situation ..its ok i get that as for the screen shot its mine to do with its not a third partys screen shot its directed to me about you (the last half) in fact a few here have tried to help you but it seems you dont want it ..ok no problem
want to see where i told shawn of this thread in the first place to help you?..the one that was in messenger just before his comment?

:whistle:

I am not sure how you tried to help me. Please explain.

Respectfully, why would you want to help me, what is in it for you? After all, its much better for you to be in bed with Stryker rather than me. You are a businessman , I am a consumer.
 
Limey Bastard
I thought Stryker had mailed out the parts at the time of your post, if not then I apologize. The post was locked for 7 minutes before I thought better of it and unlocked it again, just as Yeticom said. I understand that Yeti had communicated on your behalf to Shawn at Stryker and resolved this for you within hours. So maybe a thank you is in order to Yeti Com? He does run a busy shop and did assist you in this matter?
The Muppet from the Blacklist page..
 
  • Like
Reactions: Limeybastard
Limey Bastard
I thought Stryker had mailed out the parts at the time of your post, if not then I apologize. The post was locked for 7 minutes before I thought better of it and unlocked it again, just as Yeticom said. I understand that Yeti had communicated on your behalf to Shawn at Stryker and resolved this for you within hours. So maybe a thank you is in order to Yeti Com? He does run a busy shop and did assist you in this matter?
The Muppet from the Blacklist page..

Thank you Sir, I apoligize for calling you a name, its not what I stand for. If Yetti communicated on my behalf to Stryker which assisted in me receiving the email from Shawn after I posted on FB blacklist page then so be it. I also thank him in that case and apoligise unreseverdly.
 
  • Like
Reactions: Rustbucket713
Thank you, yes, YetiCom and I have been friends for years and we talk often, he is also a friend to the blacklist page. Mistakes were made on both sides an I could have spoke a bit nicer on my group page. I believed you were stirring up stuff after the business settled up with you. I apologize for that.
And, the Muppet comment wasn't all that.. I laughed when I read it.
 
  • Like
Reactions: Limeybastard
I am not sure how you tried to help me. Please explain.

Respectfully, why would you want to help me, what is in it for you? After all, its much better for you to be in bed with Stryker rather than me. You are a businessman , I am a consumer.
nothing..zero zip nada ...
i am not even a styker dealer ..
i no longer sell styker gear and you know why ..
i am just a nice guy ..
i messaged shawn with the link to this thread as we were talking about another matter and knowing your situation over here i thought he would like to know ..and you saw the response today in the screen shot..didnt even explain nothing to him just sent the link

cant a ex scout do a good deed any more?..the little old ladys around here all have cars so they dont need me to help them across the road :(
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ Wildcat27:
    Hello I have a old school 2950 receives great on all modes and transmits great on AM but no transmit on SSB. Does anyone have any idea?
  • @ ButtFuzz:
    Good evening from Sunny Salem! What’s shaking?