• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Is CB Radio Dead In Your Area? Maybe Not. Try This!

My way of checking for locals. Find a clear channel and listen for a minute or five. If no traffic, key up and play a song into the mic. At the end of the song, unkey and listen to the locals cuss me out.
 
My way of checking for locals. Find a clear channel and listen for a minute or five. If no traffic, key up and play a song into the mic. At the end of the song, unkey and listen to the locals cuss me out.
Many years ago I had a local who would constantly play music on Channel 19 which would drive the truckers crazy. He's no longer on the air and neither are the truckers.
 
The only daily activity that I can find in my area is a small group on channel 17. They seem to have a private club because they don't seem to want to engage with new people on the channel. There is sporadic traffic on lower 38 but they also seem reluctant to let new people in the club. I tried that method suggested by the video, only hanging around a bit longer on each channel, without any success. It's sad because in the 70's and 80's there were people to talk to 24/7. Looks like I'm going to have to get my ham license if I want to chat with others! :(
 
  • Like
Reactions: Unit 194
the phenomenon of the seemingly empty band is why i always remove the channel mute function in radios that make it possible.

having to chuff through the channels waiting for the receive to come back gets monotonous really quick, and can lead you to turn the radio off rather than going through it again.

when you remove the mute function (an FCC mandate so people couldn't talk in between channels) you can spin the dial much much faster and find out if any stations are out there on any channel.

or you could just buy an SDR receiver so you can see if anyone's out there.
LC
 

dxChat
Help Users
  • No one is chatting at the moment.
  • dxBot:
    Tucker442 has left the room.
  • @ BJ radionut:
    LIVE 10:00 AM EST :cool:
  • @ Charles Edwards:
    I'm looking for factory settings 1 through 59 for a AT 5555 n2 or AT500 M2 I only wrote down half the values feel like a idiot I need help will be appreciated