• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Twin Fuse Power Cord

And my newly acquired Kenwood TM-V71A as well. It has TWO fuses in the power lead and Kenwood recommends running power directly to the battery for BOTH leads.
when i wire a radio,i prefer to go directly to battery(s) with both wires,heavier than radio leadcwires.i install fuse holders just upsream from battery just incase a wire moves,gets pinched,insulation damaged and shorts out.i put a size bigger fuse up near batterys than radio requires but use what radio requires in its leads.if wire does develope trouble it dont burn up vehicle
 

dxChat
Help Users
  • No one is chatting at the moment.
  • dxBot:
    Tucker442 has left the room.
  • @ BJ radionut:
    LIVE 10:00 AM EST :cool:
  • @ Charles Edwards:
    I'm looking for factory settings 1 through 59 for a AT 5555 n2 or AT500 M2 I only wrote down half the values feel like a idiot I need help will be appreciated