Sidebar Sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Breedlove UHF Ball Mount 4" plates

Mudfoot

Mudfoot

Elmer
Jun 17, 2009
10,918
6,295
698
62
Southeast Ohio
Just came today. Built like a tank tank and weighs like a bowling ball. This version has 4" plates with screwdriver control cable cutout.

Definitely should be the last mount I'll ever need for my screwdriver. I'm going to get a separate ball mount for 3/8" stud for steel whip.

Nothing on the market compares to his mounts.
IMG_20190422_160657711_HDR.jpg
 
  • Like
Reactions: SIX-SHOOTER, Redbeard U812, Slowmover and 5 others

I've admired them for years. I do have a 2" Puck mount that's very nice. I'm Def gonna order a few other different mounts to have on hand. Never know if he closes shop, etc.

If you want to run 108", then u need one of his mounts.
 
  • Like
Reactions: Slowmover and BJ radionut
Mudfoot said:
Just came today. Built like a tank tank and weighs like a bowling ball. This version has 4" plates with screwdriver control cable cutout.

Definitely should be the last mount I'll ever need for my screwdriver. I'm going to get a separate ball mount for 3/8" stud for steel whip.

Nothing on the market compares to his mounts. View attachment 29019
Click to expand...
I swear that looks like a SS 2" #150 flange from a severe service line.
 
Well, nice day today....

Removed rear interior trim to install my ball mount.

Rust rust rust....

I've been needing a new (used) vehicle, so guess I'll have to defer install until I get another vehicle.

I wanted to put it on my 99 Cherokee Sport, but the wife totaled it last month. It was rust free and perfect specimen for mounting. Since my Grand Cherokee is a rust bucket, maybe I can mig a plate on top and contrive a fold over mount for the screwdriver.

Rust burns my ass
 
No rusty roof....

Popped a whole and installed my Breedlove UHF small Puck mount. Seems to be very rigid. Anyway, put my ATAS back on to test it out before putting my Diamond in its place. Got a better ground this way. Much of my ignition noise has went away.
IMG_20190511_190141960_HDR.jpg
 
  • Like
Reactions: binrat and Slowmover
Mudfoot said:
Just came today. Built like a tank tank and weighs like a bowling ball. This version has 4" plates with screwdriver control cable cutout.

Definitely should be the last mount I'll ever need for my screwdriver. I'm going to get a separate ball mount for 3/8" stud for steel whip.

Nothing on the market compares to his mounts. View attachment 29019
Click to expand...

I always recommend BREEDLOVE for their mounts.NOBODY makes anything even close to their quality.They cost a bit more but any of them will outlast you & your grandchildren.

SIX-SHOOTER
 
  • Like
Reactions: Mudfoot

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
  • @ Wildcat27:
    Hello I have a old school 2950 receives great on all modes and transmits great on AM but no transmit on SSB. Does anyone have any idea?
  • @ BJ radionut:
  • @ ButtFuzz:
    Good evening from Sunny Salem! What’s shaking?
  • dxBot:
    63Sprint has left the room.


      Top Bottom
      Back