• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Jo Gunn 8+8 "Killer Star" Gizmotchy Style.

What if element one is 90 degrees out of phase?

Then it depends on how far apart they are, the radiation pattern will be affected, pattern can vary from a carotid to a figure 8, and even an omni.

This CB circular polarization snake oil is no where near a turnstile antenna
 
  • Like
Reactions: LeapFrog
That was a C/P from the Gizmotchy site... they seem to think that just feeding a verticle element and a horiz element simultaneously results in circular polarization.

Close, but, no banana

To be fair D B, the Gizmotchy site does not exactly say feeding the vertical and horizontal simultaneously...results in circular polarization.

Here is the link using their idea to allow CP using a harness. This is at the bottom of their ad. Does it work is another question that could be argued however.

http://gizmotchy.com/newproducts.html
 
  • Like
Reactions: LeapFrog

dxChat
Help Users
  • No one is chatting at the moment.
  • dxBot:
    Tucker442 has left the room.
  • @ BJ radionut:
    LIVE 10:00 AM EST :cool:
  • @ Charles Edwards:
    I'm looking for factory settings 1 through 59 for a AT 5555 n2 or AT500 M2 I only wrote down half the values feel like a idiot I need help will be appreciated