• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Connex CX 4300 HP hack or factory?


Correct me if I'm wrong
But looks like a RF by pass to filter the RF noise in background
I looked at the schematic looks like it's in the RF section and they use those to control store energy so I'm guessing RF filter
 
I know it is in RX. But tata is about all I know. Andy and nomad usually can tell what exactly has been done. This weekend I will un do it and see if that is my FT. end overload problem.
 
  • Like
Reactions: Eldorado828
I played with that radio this morning and found that capacitor in the picture does improve the receive without bringing in the static. But I removed it because I do believe it was overloading the front end. Tomorrow will be the true test when I put the radio in my truck.
 
Just leaving along until you test it in the truck it may cut the noise big time old tech they now a lot secrets.
No it amplified the noise. But in the house it brought in week signals no overload. In the truck you could do no close talking. Even 1/4 mile away.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • dxBot:
    Tucker442 has left the room.
  • @ BJ radionut:
    LIVE 10:00 AM EST :cool:
  • @ Charles Edwards:
    I'm looking for factory settings 1 through 59 for a AT 5555 n2 or AT500 M2 I only wrote down half the values feel like a idiot I need help will be appreciated