• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

meanwhile out in the garage ...

meanwhile out in the garage ...
chasm.jpeg
crank.jpeg
exhaust.jpeg
intake.jpeg

 
All normal on shutdown the night before. Next morning a box of rocks and the coolant goes out as fast as it goes in. Down and up in an afternoon. $170 from NAPA. Scraping gasket? I'd rather be bent over a chemical toilet and done with a garden weasel. The gasket was a three beer marathon.

Today, no runs, no drips , no errors.

Next crises?
 
"I received notification from my product manager, parts are delayed a little bit and are due to RFMW on 6/17/19.

Order is marked SOR so we can ship the same day parts are received in.



Apologize as NXP confirmed parts are shipping to us on 6/10- will try to ship sooner if possible.

This is best date given, their backlog had incorrect ship date which told us parts were expected tomorrow however they updated the system and 6/17 is best date.



I will advise if any changes or improvements are made."

waaaaah.gif
 
Kop , I have & old amp yours reminds me of , A Skyhook ? Might dig it out & play w/ it as I just found 2 fresh 6lq6's !:) That old girl was fun & a good talker in it's day .
 
Where have all the Baofengs gone? Long time passing.
Where have all the Baofengs gone? Long time ago.
Where have all the Baofengs gone?
Gone to preppers every one.
When will they ever learn?
When will they ever learn.
 
(4X) GS-15B cavity, water cooled. Grounded screen, cathode driven, grid not grounded do to transit time between grids at high freqs. I need to make the supplies and add 4 grid meters along with a screen. Has plate current meters already. Should make 1200-1800 watts On 23CM (not PEP) looks like Iron mans heart :)

78a329acd7842162a76b7ef07e09503c1658171d-1.jpeg


No , it's not mine . I do know some unique people
 

dxChat
Help Users
  • No one is chatting at the moment.
  • dxBot:
    Tucker442 has left the room.
  • @ BJ radionut:
    LIVE 10:00 AM EST :cool:
  • @ Charles Edwards:
    I'm looking for factory settings 1 through 59 for a AT 5555 n2 or AT500 M2 I only wrote down half the values feel like a idiot I need help will be appreciated