-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
Trying to fix a rotor controler
- Thread starter Alan Blackmon
- Start date
BJ radionut
Supporting Member and 6m addict
http://antennapartsoutlet.com/Pages/Products/ChannelMasterPages/9521A.html...NIB $115 w/ Free Shipping
I think I paid $110 couple years back...use on my TV antenna.
However that thing is coming down this Summer...They have NO Brake...The wind spins them out of calibration endlessly. The clamps are pretty lame also...But for El-Cheapo really not the worst rotor I have ever used
All the Best
Gary
I think I paid $110 couple years back...use on my TV antenna.
However that thing is coming down this Summer...They have NO Brake...The wind spins them out of calibration endlessly. The clamps are pretty lame also...But for El-Cheapo really not the worst rotor I have ever used
All the Best
Gary
Well I solved it. Bought a controller and rotor motor from guy who got it from RS back in the day. He sent me a video of it working. My brother will bring it to me during a visit later this week. I get to try it and verify workability then pay for it. The rotor was turning a 20 meter two element light weight beam. I figure my plans for either a 10 meter moxon or 6 meter moxon should work just fine with this rotor.
If that does not work out...consider Norm's Rotor Service. Just an email might answer your questions.
https://www.normsrotorservice.com/
https://www.normsrotorservice.com/
BJ radionut
Supporting Member and 6m addict
Should be plenty big enough for BOTH bands Alan!
https://www.qsl.net/dk7zb/Moxon/Dualband-Moxon_10+6m.htm
https://www.g0ksc.co.uk/lfa-fb-test/28-50mhz-mini-yagi.html
All the Best
Gary