• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Off Road Racing Radios

Mustang 131

Sr. Member
Feb 28, 2008
576
670
103
I noticed every single radio was either a 60watt or 110watt buisness band radio. These are sold by a company sponsoring the race as MURS license free radios.
I don't have problem with it, but who breaking the law?
 

I think they are misrepresenting these radios, MURS , as far as I know, are limited to 2 watts output and must be approved by the FCC.
I know there were some rule changes recently and I may be behind a bit but that is what it used to be.
Are they saying MURS or GMRS?
GMRS requires a license.

73
Jeff
 
  • Like
Reactions: 357magnum
Wow!
After doing some reading on a half a dozen off road forums these guys are all over the place.
Some forums are telling people to get Marine radios, some FRS and others are talking about GMRS and MURS radios. There is little being mentioned about license requirements or power limits.
Maybe there is a blurb in the owners manual about needing a license but the feeling that I get in general is just buy it and use it.

Move over export radios, you have company.
73
Jeff
 
I've read about this a lot on the Side By Side (SXS) Forum I'm on, and basically they figure their out in the woods, so who's going to know.
Myself and others have educated as many as we can, but most of them don't really figure it's a problem.
 
It seems there is no legal way to do what they are doing. But I had race chatter on MURS and near MURS channels. I was told they pay extra for those "private channels".
 
Wow!
After doing some reading on a half a dozen off road forums these guys are all over the place.
Some forums are telling people to get Marine radios, some FRS and others are talking about GMRS and MURS radios. There is little being mentioned about license requirements or power limits.
Maybe there is a blurb in the owners manual about needing a license but the feeling that I get in general is just buy it and use it.

Move over export radios, you have company.
73
Jeff
Now we need an amplifier and a big old honking antenna.........
 
  • Like
Reactions: 357magnum
Feel free to reach out to me if you have any questions. I've assisted in numerous radio licensing and equipment acquisition projects for various groups.
Thank you, I'll let you know. Long story short. Since everyone in the area knows I'm into radio, I was asked if I can program business band radio's for offroad. That part was simple, but no without knowing the rules. It seemed it was the "norm" to run 110w on the MURS channels...huh???
I wanted to know what I don't know before I step on sh1t. What I saw at the race was awful. Terrible antennas that where out of tune. Most radios could not be heard at around the course. Some in one, some in both. So I set up a quick radio and had no issues being heard my mobile CDM. So I knew it wasn't just the terrain.
Have no time for this and even less interest in taking anyones buisness. But I love this kinda sh1t. Just find it interesting and like to help people who have no radio aptitude. Seems everyone wanted my radio.
 
Normally it isn't a good idea to run excessive power on low power frequencies. There are a lot of adjacent frequencies to MURS that might object to interference.

I've found that most people assume they can just buy a radio and antenna and start using it without regard to the frequency it is programmed on or antenna tuning. You certainly won't get the range with an improperly installed antenna system. Even had an issue with a legit two-way install a VHF 1/4 wave on a UHF radio in a plow truck. Just sloppy.

It is fun being the radio guy if you are appreciated (cash or beer) and you get to be involved in some fun off road stuff, too.

- Rob
 
  • Like
Reactions: Shadetree Mechanic

dxChat
Help Users
  • No one is chatting at the moment.
  • dxBot:
    Tucker442 has left the room.
  • @ BJ radionut:
    LIVE 10:00 AM EST :cool:
  • @ Charles Edwards:
    I'm looking for factory settings 1 through 59 for a AT 5555 n2 or AT500 M2 I only wrote down half the values feel like a idiot I need help will be appreciated