• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Galaxy ssb melaka variable power

basstracker1970

Active Member
Nov 6, 2012
156
31
28
53
Can someone tell me how to add variable power to this radio? I would like to put the pot in the phone hole on front. Has the 3600-14b board.Thanks....
 

VR13 is for AM power and VR12 is SSB. You can remove VR13 and attach your wires from that location to your pot you want to install in the front to give you variable (carrier) on AM.
 
Isn't there a way to do it with leaving vr13 intact? I mean it's the same board as the other radios that have variable rf power from the factory. Anyone ever do it a different way? Thanks
 
Good info there unit 75. I'm going to be messing around with this and will post back with results.
 
  • Like
Reactions: Unit 75
I ended up just wiring in a variable by removing vr13 because I was pressed for time. I did get a tip though that I'm going to use for next time. That is to change r237 to higher value to keep carrier from going to high when variable is wide open. Which is really my main concern.
 
  • Like
Reactions: Unit 75

dxChat
Help Users
  • No one is chatting at the moment.
  • dxBot:
    Tucker442 has left the room.
  • @ BJ radionut:
    LIVE 10:00 AM EST :cool:
  • @ Charles Edwards:
    I'm looking for factory settings 1 through 59 for a AT 5555 n2 or AT500 M2 I only wrote down half the values feel like a idiot I need help will be appreciated