• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

meanwhile out in the garage ...

topbox.jpeg


Top box. I was running out of room.

https://www.lowes.com/pd/CRAFTSMAN-...egSov0d3R5RX9o5ucBxoC3tAQAvD_BwE&gclsrc=aw.ds
 
Last edited:
full_size_bias_mod2_9.2.png

gcode and the original artwork may be available on request. It depends on how good your manners are and how convincing the request is.

At 6 x 2.5" and a .030" endmill @ 33 inches per minute and 72,000 lines this is not a beginners project.
 
  • Like
Reactions: Shadetree Mechanic
this example more of an MP 3008 copy...

It’s not in the vertical like an MP3008, just folded into storage position and mag in.

But...the MP3008 is definitely the one to copy of one wants an “authentic looking” vertical Sten.

Few people today even know what the MP 3008 is!

Going to do a carbine on the MKIII, but they do look stupid with the long barrel...except the MKIIS...that’s pretty cool.
 
  • Like
Reactions: ButtFuzz

dxChat
Help Users
  • No one is chatting at the moment.
  • dxBot:
    Tucker442 has left the room.
  • @ BJ radionut:
    LIVE 10:00 AM EST :cool:
  • @ Charles Edwards:
    I'm looking for factory settings 1 through 59 for a AT 5555 n2 or AT500 M2 I only wrote down half the values feel like a idiot I need help will be appreciated