• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

SWR Too low

Yes it doesn't move when I run the channels....Weird

I know that antenna is very broad-banded and reportedly produces low SWR’s over a wide range of frequencies, but it seems there should be some variance across the CB band even if it’s not much. (n)
 
when i get home from work I'm gona throw the old coax back on and double check this
more, Its got me confused. I like better SWR however barley moving the needle makes me feel a problem..........TY
 
Well, it should most likely be tested at the antenna if at all possible with a 6-inch jumper and an analyzer or portable radio or even a walkie talkie "just trying to cover the bases" that way you could see if there is first a different reading at the antenna and second a conflict with the coax length. Remember the loss of power being delivered to the antenna through 130 feet of coax could be significant and should be measured by inserting a meter at the antenna and comparing it to a measurement of power at the radio the reason being if there is significant loss it would also result in a lower reading on the SWR meter as the loss would be experienced both in the forward and reflected directions. You could also through a 50ohm load at the end of the coax and see what happens. W9cii covered some of this in his charts just thought I would try putting in words.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ Wildcat27:
    Hello I have a old school 2950 receives great on all modes and transmits great on AM but no transmit on SSB. Does anyone have any idea?
  • @ ButtFuzz:
    Good evening from Sunny Salem! What’s shaking?
  • dxBot:
    63Sprint has left the room.
  • dxBot:
    kennyjames 0151 has left the room.