• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Vintage Hallicrafters

96275661_3209132865777817_2261890487159881728_n.jpg


I was actively searching for one of these. Gave up as all I'd find was junk.
 
Last edited:
  • Like
Reactions: Rwb
While in Ft. Gordon Signal School back in 1966, I spent half my military monthly allowance on a Hallicrafters S-120, like the one seen with Castro ad. I just and had to have it after seeing one for sale in the PX. I had my general license before entering the service, so that receiver for a time became my main source of off duty entertainment. Our Signal School only lasted 3 months. When I was transferred the radio was decidedly too bulky to stuff in my duffel bag. It was simply left behind for the next group of guys to play with. Although I probably tuned across Castro a few times I can’t say I ever remember listening to him. Most of my time was spent carefully tuning SSB and CW on 40 meters with a 30 foot piece of scrap wire along with the touchy BFO on that very unstable radio.
 
Was that battery powered?
Unlike many of the early military tube radios that could be run off of a battery through a Dynamotor, the Sky Buddy was never meant for mobile use. It’s just your basic 115v AC short wave listener or base radio, although I have heard some of the export ones had a tapped transformer inside to accommodate various European AC voltages. The Sky Buddy had a 2 prong un-grounded AC plug that was commonly used during those days. For safer use, restorers usually upgraded that cord and plug to the modern 3 prong grounded type. If you’re interested in learning more about Dynamotors, check out the following link.
https://www.instructables.com/id/reviving-a-WW2-dynamotor-how-tube-radios-went-mob/
 
  • Like
Reactions: Slowmover and Rwb

dxChat
Help Users
  • No one is chatting at the moment.
  • dxBot:
    Tucker442 has left the room.
  • @ BJ radionut:
    LIVE 10:00 AM EST :cool:
  • @ Charles Edwards:
    I'm looking for factory settings 1 through 59 for a AT 5555 n2 or AT500 M2 I only wrote down half the values feel like a idiot I need help will be appreciated