• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Cobra 2000 GTL

By the way LC , if you like the Cobra 2000 .... then you probably don't want to hear about the CPI CP2000 (CPI - Communications Power Inc.) radio that I've been trying to track a power cord down for ... right ?? ... lol

You probably already know this, but I'll put it out there anyways for those who don't.

CPI 2000 power cord, Belden "PH163" cable.
Also used in '60s and some '70s vintage HP test equipment, Celestron scopes, and Wurlitzer jukeboxes.

Looks there's one for sale on fleabay right now: https://www.ebay.com/itm/174308852557
 
  • Like
Reactions: Raccoon
You probably already know this, but I'll put it out there anyways for those who don't.

CPI 2000 power cord, Belden "PH163" cable.
Also used in '60s and some '70s vintage HP test equipment, Celestron scopes, and Wurlitzer jukeboxes.

Nope TM86 .... I didn't know that , thanks for letting me know . I've been trying to locate one for a few months now .
 
  • Like
Reactions: 357magnum
Like TM86 said that cable for the PH163 style is the one. Belden/Volex model #17280 or Alpha 543. Belden/Volex model #17952 or Alpha 544 will work also. (The only difference is that they have the hot and neutral wires reversed.) The later built Tram D201 and the D201A used the same cord. They are hard to find and the sellers know that so they are always priced at around $30.00.
 
  • Like
Reactions: Raccoon
I could do the work myself .... I use to buy older dead radios , bring them back to life , and their former glory ... and then sell them . But I haven't done that in a long time , and my eyes aren't as good as they use to be . Not that I don't think I can do it , because wearing my glasses makes a big difference .... and working on solid state & tube equipment isn't nearly as bad as this surface mount stuff is . I considered doing it myself for a minute ... when I saw people selling the Cobra 2000 electrolytic cap kits on ebay .

I used to do a fair amount of solder/repair when it was required at work, and then on equipment at home but I went over ten years w/o touching an iron and got stale. When I began again it was glaringly apparent that between age, eyesight, and less than rock-steady hands that I needed practice. I got out some junkers and just soldered/unsolder components until I fell back into the groove. If you feel rusty, perhaps you could practice on some junkers first before starting on the 2000.(n)

If you decide to give it a go, I'd recommend the EBAY seller Klondike Mike. I've bought several capacitors kits from him and no issues. I heard he has a website now as well but I don't remember what it was (maybe klondikemike?) Good luck whatever you choose!
 
  • Like
Reactions: 357magnum
I used to do a fair amount of solder/repair when it was required at work, and then on equipment at home but I went over ten years w/o touching an iron and got stale. When I began again it was glaringly apparent that between age, eyesight, and less than rock-steady hands that I needed practice. I got out some junkers and just soldered/unsolder components until I fell back into the groove. If you feel rusty, perhaps you could practice on some junkers first before starting on the 2000.(n)

If you decide to give it a go, I'd recommend the EBAY seller Klondike Mike. I've bought several capacitors kits from him and no issues. I heard he has a website now as well but I don't remember what it was (maybe klondikemike?) Good luck whatever you choose!

Thanks Woody , I hadn't thought of that ... that's a great idea .
 
  • Like
Reactions: 357magnum
That style power cord was also an industry standard for any office equipment like typewriters, calculators, or such from the early 60s to the late 70s.

We got in the habit of removing that style socket, punching a new hole and mounting a rectangular IEC socket. Cord can be obtained easily thereafter.

73
 

dxChat
Help Users
  • No one is chatting at the moment.
  • dxBot:
    Tucker442 has left the room.
  • @ BJ radionut:
    LIVE 10:00 AM EST :cool:
  • @ Charles Edwards:
    I'm looking for factory settings 1 through 59 for a AT 5555 n2 or AT500 M2 I only wrote down half the values feel like a idiot I need help will be appreciated