-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
Turner+ 2 mic in a Stryker 955 radio
- Thread starter Alexis Mercado
- Start date
Greg T
WDX-945 (Jazz Singer) Upper Peninsula of Michigan
My guess is that, being the vintage it is, the Plus 2 may be a high impedance microphone. You'll have to find the specs. Pretty certain any radios made within the last 30 years or more are probably low impedance units. With an impedance mismatch you may find the audio quality lacking a bit AND you may have to bump the gain up a bit more than usual, which could cause some distortion. I would suggest you find the specs on the mic and then check the manual for the radio to see if they match. 600 ohms to 5k ohms is a pretty large mismatch.
Been using a Turner +2 microphone with a Stryker 955 for several years now.
works just fine.
works just fine.
if i read it right pin 1 is shield pin 2 is audio white wire,, pin 3 is black transmit control,,, pin 4 is recieve control red wire