Guys has anyone saw Roosters videos of these beams? They look pretty interesting to me. According to the videos the seem pretty broad banded for a big yagi. Any feedback would be appreciated. Thanks
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
JTG/Gump built OWA beams
- Thread starter The20poundhammer
- Start date
BJ radionut
Supporting Member and 6m addict
Thanks BJ interesting info there. The fact they build and tune the beam before u get it and mark where everything goes so no guess work or measuring to do. I really like the direct feed with the balun. Any thoughts guys?
I ordered the 6 element. I will do a comparison with my other beams.
I built a six element 6m OWA several years ago using tubing from an old Wilson Shooting Star. It works VERY well with a really tight pattern. The OWA stands for Optimized Wideband Array however I would not say it is really wideband. I forget the SWR bandwidth on it but I just care about the bottom 500KHz of so of the band anyway. Many people comment about the really close spacing of the reflector, driver, and first director element but it allows heavy coupling and enhances the forward pattern. I use a coaxial balun at the feedpoint as well. Here it is on the ground as seen from the top of my tower. A pair of 13B2's for 2m are on either side. 
I don't have it yet. The plan is use it on the flat side at 60'. But also to unscientificily compare it to my other 6 element owa. Not expecting much of a difference. But curious...
Then using antenna with less gain on my other tower on the vertical side.
another design that should be considered is the g0ksc OPDES style yagi
imagine 26-28 or 27-29 bandwidth in a high performance yagi
hey Eddie check them out and let us know what you think..
72+1 RCB just a ways south of the astrodome