in the new manual for this yagi antenna on 27.mhz or above
instead of cutting just drill new holes and insert the element
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
Sirio SY27-3 3 element yagi.
- Thread starter SMILEX2692002
- Start date
in the new manual for this yagi antenna on 27.mhz or above
instead of cutting just drill new holes and insert the element
Shadetree Mechanic
Delaware Base Station 808
Make a cut in the outer tube so a hose clamp can be used to squeeze the inner tube. Use anti seize that has metal in it between the tubes to seal out moisture and improve conductivity.
I now have the SY27-4
It required cutting all the elements with a hacksaw.
It was pretty straightforward and simple. I bought a metric tape measure to make all the measurements.
I cut mine for 27.500
It works great.
It required cutting all the elements with a hacksaw.
It was pretty straightforward and simple. I bought a metric tape measure to make all the measurements.
I cut mine for 27.500
It works great.
