• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Help locating one of these (dual gang pot)

Eldorado828

8-2-8 in the Lonestar state
Feb 21, 2016
3,839
7,220
523
The Lonestar State
Good morning fellas. I'm looking for one of these dual pots with on/off switch like this one. It's a ranger style echo board pot that came with an aftermarket board. This one had a bent shaft so did my best to straighten it but internally its damaged. Anybody have one they can part with?

Thanks
 

Attachments

  • 20201024_120149.jpg
    20201024_120149.jpg
    1.1 MB · Views: 19
  • 20201024_120747.jpg
    20201024_120747.jpg
    2 MB · Views: 18

Barkett has a bunch of dual controls used in stuff made by RCI.

Just doesn't seem to have that one. The center shaft is a 10k audio taper, hence the "A" suffix after the "103". Probably the echo volume knob.

The "104" 100k section is a linear taper pot.

Makes me wonder if you couldn't get by with the more-common 50KA/50KB control used with the echo boards built into a lot of radios. Also shows up as the volume/squelch/power control in mobile radios.

Here's what Barkett has: http://stores.goldeneagleradios.com/potentiometers/?sort=featured&page=1

Might have to settle for a substitute. The particular combo of resistance values in your control doesn't seem to be commonly offered for sale.

Unless Ken has it.

73
 
  • Like
Reactions: Eldorado828

dxChat
Help Users
  • No one is chatting at the moment.
  • dxBot:
    Tucker442 has left the room.
  • @ BJ radionut:
    LIVE 10:00 AM EST :cool:
  • @ Charles Edwards:
    I'm looking for factory settings 1 through 59 for a AT 5555 n2 or AT500 M2 I only wrote down half the values feel like a idiot I need help will be appreciated