Here's how I cleaned up my DC input power. Seems the pin terminals hold the connection better and less danger of shorting since these connections are so close. I tried solder on bare copper, but they still came loose eventuality.
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
RM Itlay power connection
- Thread starter 86lidewell
- Start date
Shadetree Mechanic
Delaware Base Station 808
look at the last picture. It has the part number and the seller. These work for all the RM Italy amps. Any larger gauge and they wont fit inside the holes.
Shadetree Mechanic
Delaware Base Station 808
Shade…I don’t know about SSB but the 503hd does 300 on AM…I doubt seriously the 450 number. I have two 503hd. On NIB and the other seldom used.
I’ll post pictures (in an hour or less) of output on the Telepost LP-700 of the 503hd output on AM and SSB…also of the KL-703 all into a dummy load
I’ll post pictures (in an hour or less) of output on the Telepost LP-700 of the 503hd output on AM and SSB…also of the KL-703 all into a dummy load
Last edited:
Ok as promised…here are the specs for KL-703 into my DL 2.5k Palstar dummy load running off an Astron VS70M power supply. All readings taken at 13.9 volts. Up nex KL-503hd
Attachments
Hey, didn’t know you’d found a 703!
Very nice as presentation on these two amps, thanks!
The OP work of power pigtail (best practice) is well-illustrated.
Very nice as presentation on these two amps, thanks!
The OP work of power pigtail (best practice) is well-illustrated.
Nicely done!! I'm digging your lp-700, top notch report and equipment.
I'd settle for the lp-100A for myself
I'd settle for the lp-100A for myself
NON INSULATED PIN TERMINAL
Have asked at WALCOTT, HRO and a couple of shops thinking I might find on shelf