I've already beat myself up over this but at the time didn't realize it would be a problem. I was testing SSB radios about 10 ft apart, one in mobile, one base on a 16ft antenna on the roof. When trying to clarify and get my voice to sound good (admittedly i was showing my daughter how it worked) my galaxy went dark (she said). It blew the breaker on my DC power supply.
So right now, any time we turn the DX on, on AM it might sit there RXing fine for a bit, but if I let it sit or try to TX, it will pop the fuse again. If I turn it from AM to LSB/USB, it the RX light does not go on at all, and the freq counter will dim for 3 seconds with a hum coming from speaker and the fuse will pop every time.
Where should I begin to look?
So right now, any time we turn the DX on, on AM it might sit there RXing fine for a bit, but if I let it sit or try to TX, it will pop the fuse again. If I turn it from AM to LSB/USB, it the RX light does not go on at all, and the freq counter will dim for 3 seconds with a hum coming from speaker and the fuse will pop every time.
Where should I begin to look?
Last edited: