You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
Sometimes it helps to understand where that red dot is connected to on the display side. Its a16 pin common anode LED display (same as the Cobra 29 LTD and many others). Pin 4 of the first digit and pin 5 of the second digit are connected together before it gets to the red dot as shown in the schematic. I often work back to the source when I have trouble finding this common point on some radios.
Thanks guys. I was hoping there might have been a vr for brightness. My soldering skills are decent but finding my way around on a diagram as to where exactly to put the resistor could be a challenge. Ill familiarize myself with that section of the radio for starters. Cheers thx
This forum does not allow a single user to have more than one username. If anyone wants to change their username contact an admin and it will be done. Multiple accounts belonging to the same member will be deleted without warning.