I have a powermax PM3-100LK I have the box what I do not have is the paper work. I want to use it as a power supply , it has 2 set screws on the side if you no how to set this up I,d appreciate the information . Thanks
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
POWERMAX
- Thread starter BigLou
- Start date
- Status
I ran one for awhile. All you do is hook your wires up to it with the correct polarity. I dont remember it needing anything jumped to get it to “wake up” like some or all of the Iota supplies.
I don’t have mine in front of me. But pretty sure the rear set screw should be turned towards the front for fixed output. The other two positions are for charging. Hook a volt meter up and adjust the front screw to get the voltage you want.
I owned a pm3 for a while and it was a simple plug-n-play. It worked well
O my , did my post bother you Captain Kill o watt ? Was it beneath you ? Did you NOT no the answer ? Or maybe your just having a bad day in any case I,ll tri to ask questions befitting a man of your obvious knowledge . On 2nd thought if you did not have anything to add that would answer the question you could just shut up. You have a nice day WDX 708 .
Thanks to all your help is and was most enlightening and was just what I needed. That set screw was very touchy I had to settle for 14.1 VDC it just did not want to do 13.8 VDC . I,m useing the powermax to run a , I dont think I,ll say here but the spes call for 13.8 to 14.0 so it should work . I hope
S&W357
$upporting Member KO4RJD....WDX-556
Should work great. Mine does at least. I like the looks of those four red 40 amp fuses.
Fan only comes on when it needs to.
Fan only comes on when it needs to.
No need to be a complete ass. We have a way to deal with those. You said you did not have the paperwork. I gave it to you. You are welcome. It answers your question as well as anything else you might ask about it. What is that old saying? Give a man a fish, and he will eat for a day. Teach a man to fish, and he will eat for a lifetime. What is it about people that just want to be given all the answers and not put any effort into looking something up or actually learning something?
Some people enjoy speaking with others about things, even if through the internet. I do at times, but not all the time. I do not ever reply to questions the way you did, Captain. I never will. I remain most humble. I have to admit that your initial post was most sarcastic overall, but that wouldnt ruffle my feathers as far as I am concerned. Others may take things a multitude of ways. Now the threat in your reply I found most odd, as you are a staff member. I do not recall Lou threatening or using actual foul language in answering your reply. I will have to re-read it. Was either technically necessary? Probably not, but I usually call things the way I see them and it is what it is. Good day to all! And I am glad he got the info he needed.
Apparently you missed the part where he said if I did not have anything to add that would answer the question, I should just shut up. I presented him with the very manual that he said he did not have which contained the answer to his question and more. It could have been obtained in a matter of seconds using the same method I did.....GOOGLE. I see this happening everywhere all the time in this day and age. We have the most information available to us than we ever had before and people still do not bother to look for themselves but want things handed to them. I have lost manuals before and have NEVER asked for info from one with one exception.........a Conway Master Ranger high impedance FET multimeter and I asked EVERYWHERE and still have not found a manual for it yet. If I need something I download it so I have the COMPLETE info available to me whenever I want it. I have downloaded modifications and not asked. In fact I have to be EXTREMELY desperate for a piece of info before I ask someone for it since it usually takes FAR less time to find it online than it takes to ask a question and then wait...........and wait.......................for a response, and hopefully that response is correct. I gave him the info he was lacking and asked a general question. Period. Perhaps someone would like to speak to a manager about it.
If I was still in management I’d pull both of you into my office to have speaks. Good morning people.
Christ almighty, it's like I'm sittin' here playing cards with my brother's kids or somethin', you nerve-racking sons of b%^$#@. (Tombstone)
What can I say , Private Kill o watt when you respond to a QUESTION with a sarcastic ANSWER you are going to get a sarcastic answer back . You are NOT my teacher you were out of line with your sarcastic remark we all no that , and as far as that old fish proverb go,s it was right your sarcastic remark was and is all wrong . Now I am going to do what you should have done I,m going to SHUT UP .
- Status