• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

President Richard Export (Cobra 148GTL DX) - need a tuning can

After looking at the photo close-up I spotted at least 3 other core tops that are cracked. That typically happens when too much force is used or from an improper sized tool.
Guessing others have been in the radio before as some of the settings didn’t seem stock. Going to talk with Kens Electronics tomorrow about parts. Really cool radio, does take a couple of minutes to warm up on freq from power on but has good audio on AM and SSB with stock microphone.
 
Last edited:
  • Like
Reactions: AudioShockwav
Talked with kens electronics and unfortunately he didn’t have the part.

Uniden PB-010 board - coil LB137 92187. (L37) location.

If anyone has one let me know! Thank you
 
Have you tried:
Scan down the page until you see the LB137. Seems to list many on that line. Could they all be the same? I don't know, you'd have to ask him for your specifics.
Good luck finding your part.
73
 
Have you tried:
Scan down the page until you see the LB137. Seems to list many on that line. Could they all be the same? I don't know, you'd have to ask him for your specifics.
Good luck finding your part.
73
Yeah an LB137 out of a TRC453 (L15) or PB042 President Jackson (L22/L23), PC999 President Grant (L29/L38), Courier Galaxy IV (T16/T17) would work too :)
 

dxChat
Help Users
  • No one is chatting at the moment.
  • dxBot:
    Tucker442 has left the room.
  • @ BJ radionut:
    LIVE 10:00 AM EST :cool:
  • @ Charles Edwards:
    I'm looking for factory settings 1 through 59 for a AT 5555 n2 or AT500 M2 I only wrote down half the values feel like a idiot I need help will be appreciated