-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
Stryker 955/655 V2 NPC mod?
- Thread starter FredTx63
- Start date
Shadetree Mechanic
Delaware Base Station 808
Does it need an NPC mod? Mine swings to peak from any carrier level. Might be able to increase the modulaton in the service menu.
Greg T
WDX-945 (Jazz Singer) Upper Peninsula of Michigan
They do if you set them up right. For my V1, I have it set to limit the swing to 35W while maintaining a 1 to 2W carrier. But, they are able to swing full output if you want. The V2 even more so.
I wrote about it in the Anytone 5555 Plus page. I posted a pic of the NPC mod I developed for this chassis.
I use rack gear on my 5555 plus and it turned out great with the NPC mod. Check it out.
You must be able to solder very very good to pull this mod off!
I use rack gear on my 5555 plus and it turned out great with the NPC mod. Check it out.
You must be able to solder very very good to pull this mod off!