1. You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
    Dismiss Notice
Dismiss Notice
This forum does not allow a single user to have more than one username. If anyone wants to change their username contact an admin and it will be done. Multiple accounts belonging to the same member will be deleted without warning.

Recent Activity

Activity stream for all registered members at WorldwideDX Radio Forum.

  1. tecnicoloco liked Handy Andy's post in the thread Scratchy, tiny sounding receive on SSB.

    If you run those MB8719 chassis like the 148, 142 GTL or 2000 - all from Cobra, they usually offer a "Tone switch" to compensate for...

    Sep 18, 2020 at 7:02 AM
  2. tecnicoloco liked kopcicle's post in the thread Scratchy, tiny sounding receive on SSB.

    @Handy Andy had a graph of this some years ago (may have been the other forum. ) Picture worth a thousand words as it were. Your...

    Sep 18, 2020 at 6:48 AM
  3. tecnicoloco liked Handy Andy's post in the thread Zero Beat.

    Thanks - here's some help for you... [ATTACH] And GOOD NEWS Did not see this before! YOU DO HAVE TEST TONES! AWESOME! Self contained......

    upload_2020-4-14_18-38-47.png upload_2020-4-14_18-43-40.png upload_2020-4-14_18-46-17.png Sep 18, 2020 at 6:39 AM
  4. tecnicoloco liked 500kpot's post in the thread Cobra 25/29 10k slide help..

    I tried that 5351/328 combination. I read the same post and asked for a copy of the software but no one ever got back to me so I just...

    Sep 18, 2020 at 6:35 AM
  5. tecnicoloco liked hpssb's post in the thread Cobra 25/29 10k slide help..

    One mod from a year back on T1 for the cobra 29, gives low 40, high 40, 5kc shifter switch and 10kc shifter switch with $20 worth of...

    Sep 18, 2020 at 6:34 AM
  6. tecnicoloco liked 500kpot's post in the thread Cobra 25/29 10k slide help..

    I agree with you, Mr. Kopcicle, you the real way is to dump the 2816. There is no 10.695 oscillator in the 29 only 10.240. The 10.695...

    Sep 18, 2020 at 6:34 AM
  7. Robalo liked Justme's post in the thread ARE ALL BASE CB AMPS SPLATTER BOXES?.

    See above 543_Dallas, answer. One reason even with a good filtered radio i always watch the ALC action. When it starts to react i stop...

    Sep 18, 2020 at 6:17 AM
  8. autotuner replied to the thread Fellow gunslingers....

    Call me a dinosaur, but it's kinda like those new twin turbo small displacement engines they are driving in SUV's. Don't know if you...

    Sep 18, 2020 at 6:10 AM
  9. autotuner liked r carl's post in the thread Paint the needle?.

    Brighter light bulb?

    Sep 18, 2020 at 6:04 AM
  10. Robalo liked 357's post in the thread Base PDL II.

    Well I got more parts, so239's and 12awg wire [ATTACH] [ATTACH] [ATTACH] [ATTACH]

    IMG_3048.JPG IMG_3047.JPG IMG_3045.JPG IMG_3044.JPG Sep 18, 2020 at 6:01 AM
  11. Robalo liked 357's post in the thread Base PDL II.

    I got the easy ones clean with sos pads. the fiberglass I'll do outside with some gloves and maybe goggles. I'll have to sand and seal...

    IMG_2912.JPG IMG_2913.JPG Sep 18, 2020 at 5:53 AM
  12. Robalo liked sp5it's post in the thread Mobile SWR readings vary depending on meter used.

    Take 100 Ohm resistor 4W or more. Not wirewound. Plug instead of antenna, measure SWR, come back with result. Meter should show SWR...

    Sep 18, 2020 at 5:32 AM
  13. walterjn liked sunbulls's post in the thread Paint the needle?.

    I’ve used the toothpick (sewing needle) method also with fair success, but if you own an airbrush, that’s the ultimate solution. You...

    Sep 18, 2020 at 4:56 AM
  14. nomadradio replied to the thread DAK Mark X Works Great.

    Original post is from March 2019. A year and a half ago. Might try sending blake25537 a PM. It's called "start a conversation" on this...

    Sep 18, 2020 at 4:39 AM
  15. nomadradio replied to the thread Galaxy Saturn base radio - no transmitted audio..

    The 0.7 Volts on TR32 base explains why TR32 is killing your mike a audio. This should be zero volts until you start to talk. Might have...

    Sep 18, 2020 at 4:33 AM
Loading...
  • About Us

    The WorldwideDX Radio Forum was originally established in 2001. We pride ourselves on welcoming Radio Hobby enthusiasts of all types, while offering unbiased, informative, and friendly discussion among the members. We are working every day to make sure our community is the best Radio Hobbyist's site.
  • Like us on Facebook

  • Premium VIP Member

    The management works very hard to make sure the community is running the best software, best designs, and all the other bells and whistles. Care to buy us a beer? We'd really appreciate it!

    Donate to us!