• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
  • A Winner has been selected for the 2025 Radioddity Cyber Monday giveaway! Click Here to see who won!

Search results

  1. Steve_Buckeye

    CB Tricks

    Upload to the Radio Forum!
  2. Steve_Buckeye

    My Classic Ham Shack

    My Little Shack in the Garage. Enjoy Steve Buckeye, AZ
  3. Steve_Buckeye

    Looking for my first true ham radio

    I agree, the 450D is a great entry level rig.
  4. Steve_Buckeye

    RM Italy 203p amp

    I have been using a RM-203p for 4 years now and its working great, I only drive with 2 1/2 watts at 13 volts and swings to about 100 on the Dosy.
  5. Steve_Buckeye

    CB dipoles

    I use a G5RV Light (65 ft dipole) along with a Texas Star 350 amp and this works fine at around 100 plus watts. It would be a bit limited running barefoot, conditions would have to be very quiet. The band is busy and to bust the pile-up takes a bit of effort.
  6. Steve_Buckeye

    Few questions about dipoles.

    I'm using a GR5V light (64ft) by Radiowavz along with a MFJ 969 with good results. see link below: http://www.shop.radiowavz.com/G5RV-Lite-80m-6m-G5RVLITE.htm
  7. Steve_Buckeye

    CB dipoles

    I'm using a 54' dipole in my attic with a MFJ tuner with god results. I cann't get Europe but I can shoot the skip from Arizona to Main, New York, Florida, etc.
  8. Steve_Buckeye

    WTB: RF Limited CR-577 Microphone

    I have been looking 6 months now, I heard the owner died and the son is taking over. He hasn't returned any of my emails so I'm not sure if they are going to bring the 577 back.
  9. Steve_Buckeye

    What to buy??

    FYI - New Stryker model 955 just came out it covers 12, 11 & 10 meters!
  10. Steve_Buckeye

    Looking at CB

    Ask around in your area for a good shop! You can drive the radio with lower mic gain and no long conversations until you get it aligned. However if a shop tells you that you don't need this, run!
  11. Steve_Buckeye

    Looking at CB

    I would check 2 known issues with these radios,1- the bias voltage is turned up to high at factory (should be around 3.8v to give finals a longer life) and 2- Check that the regulators and the finals have enough heat sink compound. Otherwise these are great radios.
  12. Steve_Buckeye

    Icom IC 7600 or 7410 any inputs comments?

    I had the IC-7410 for 2 years now and love it. At the time it out-shined the Kenwood and Yeasu. At this point in time the New Kenwood TS-590SG is the leader for that price range. Too bad you didn't tale advantage of the holiday sales.:sneaky:
  13. Steve_Buckeye

    New Sirio Tornado 27

    Save up and buy some LMR 240 (or LMR 400@ 1.50/ft), also put a choke at the antenna feed point. I coiled like 7 turns with an eight inch diameter. This worked out for me.(y)
  14. Steve_Buckeye

    Help with first HF rig

    BEWARE the TS-440 have some issues with the glue used on the main board. Many have dots on the screen due to the glue becoming charged!
  15. Steve_Buckeye

    Help with first HF rig

    Few new radios out there also, check the Black Friday sales. HRO is selling the new IC718 for $580.
  16. Steve_Buckeye

    Dosy Tc-4001-P

    :LOL:I heard t can be tweaked to read anything.......
  17. Steve_Buckeye

    ANYONE HEARD THE JAMMER ON 38LSB

    (n)Makes me glad t live in Arizona, haven't head him yet.
  18. Steve_Buckeye

    Cobra 2000GTL

    I have a UG8 stand with a 10-D head wired for 4 pin. Maybe I should rewire it.
  19. Steve_Buckeye

    Cobra 2000GTL

    Anyone know of a good desk mic to use with the 5-pin Cobra????(n)
  20. Steve_Buckeye

    Stryker SR -955 hp

    What went wrong with your 955????:mad:
Top Bottom