• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Search results

  1. F

    black Cat JB2000

    That is the correct way to set the amp's carrier with the tuner on the back when using the stock driver tube. It's basically a JB 150 driving a pair of 3-500Zs. Alan
  2. F

    Old Amp, But Is It HomeMade?

    Looks like a Crusader 125 made in Lebanon, TN. The stud mounted outputs are getting hard to find.
  3. F

    MKVlA

    Most of the originals were OMRON. Some are...MHE402PG-UA-DC6 2A28VDC/120VAC Another OMRON...MHE405PG-UA-DC6 5A28VDC/120VAC Have also seen Magnecraft... W67CSX-6 NOM VOLTS:6 RES OHMS:52 CONT RATING:3A Hope this helps, Alan
  4. F

    Key CB In Indiana

    WOW!
  5. F

    HOW DO YOU CLEAN A DAK IX , X CHANNEL SELECTOR SWITCH, ITS SEALED

    Ron, I would check for a bad cap in the VCO supply or the VCO being out of alignment its self. Alan
  6. F

    My Tram D201 Needs Retubed?

    PM Sent
  7. F

    Who's going to Dayton Hamvention 2012?

    I'm leaving in a couple of minutes to help my friend set up this evening. I'll be around #'s 1315-1319 Friday and Saturday. Hope to see you then. Alan
  8. F

    Magnum 750 Linear?

    Almost the same amp as the Golden Eagle 750, but some used 8950's. Fixer
  9. F

    Kicker K-500

    Good, I thought that might be the problem. I clean or replace a lot of relays in the Kicker, Swinger and Firebird amplifiers. Fixer
  10. F

    Kicker K-500

    Possibly the relay. When the output drops off, use something insulated to push on the contacts and see if the power comes back. Fixer
  11. F

    Galaxy 1000 final tubes ID

    I have used the 6LW6's to replace 8908's in a grid driven "modulator" type amplifier where the cathode and suppressor are both grounded. Output is lower though, usually about 2/3 to 3/4 of what the 8908's would do. Fixer
  12. F

    Galaxy 1000 final tubes ID

    8908 = 6 V version of 2057 with an octal base 6LW6 = lighter version of 8908 with Cathode and Suppressor Grid tied together
  13. F

    Browning MK 3 advice

    Moviking, The crystals are on the back of the band (tuning) switch. Fixer
  14. F

    Browning S Line.

    Browning S9 I have the schematic for the S9 that I should be able to copy for you. Contact me at Fixer7526@wmconnect.com or www.tubesplus.com Alan
  15. F

    Confusing Number of 6L6 Tubes on Market

    Are you sure that the tubes aren't 6LQ6's? Fixer
  16. F

    browning mark 4a ...help

    MKIVA I sent you a private message. Merry Christmas To All, Alan
  17. F

    Black Book Of CB Linears?

    The 305 isn't listed in it. Fixer
  18. F

    Still Need Help with my 6v6 driving 4- 807's

    Amp Help JW, I sent you a PM. Fixer
  19. F

    Scout 20x20

    The 120 VAC could possibly be the contact rating. What is the coil resistance? If it is in the 100 to 180 ohm range then it is probably a 12 VDC coil. Fixer
  20. F

    Scout 20x20

    All the Scouts that I know of use a transistor keying circuit. The relay coil voltage should be 12 VDC. Not 110 V. Fixer
Top Bottom